Not really sure where to exactly i should've posted this but its here now. I am recently new to CMM so im still learning alot. That being said I have a slight issue with something im trying to do with my CMM I am trying to do an adaptive circle scan on the OD of a circle Ive gotten it adjusted correctly to the right diameter and depth to check it. When I start the program it makes contact with the part but then starts going away from the part. I think I need like a barrier. Similar to a clearance plane but reverse. Im sure its in PCDMIS and im just not seeing it. Any and all help is appreciated.
Not sure I follow what you mean by that. It is my understanding if it is on in the feature it will be used, also the sample hit setup parameters do not look correct and will cause problems.
Not sure I follow what you mean by that. It is my understanding if it is on in the feature it will be used, also the sample hit setup parameters do not look correct and will cause problems.