After switching on the machine goes to the zero position, after coming to zero, the motors are turned off. One day the machine works fine, the other day does not reset. Then it works OK for two days, it does not reset for two days. I contacted the service, but there is no answer.
GLOBAL PERFORMANCE PC-DMIS 2018 R1 head ---PH-10M Renishaw
Information by mistake below.
Error code:0X1400008C Module:CE - Command Executor (layer 4)
Label:First Reference mark not found where expected
File:../../src/ceCmdHome.cpp - Function:autzerNormalMode - Line:496
Error type: Strong2 - Motors immediately turned off
Axis = X
Current command: AUTZER
Position: -165.121 -0.001 0.004 0.000 0.000 0.000 -0.001 0.000 0.000
Velocity: 10.000 0.000 0.000 0.000 0.000 0.000
Auto mode
CNC mode
Probe seated
Safety barrier closed or not present
Occured:10/28/2020 09-20-47.939
Reset: 10/28/2020 09-20-47.945
Attached Files
