Error codes

I was hoping someone had a list or link or something to decipher error codes

Over the past few weeks I get a: Level 3: Axis Z error (0x8), Level 3: Axis X error (0x8), or Level 3: Axis Y error (0x8)

It only occurs when I start up the machine and it moves to home and it is only ever in 1 axis.

The machine is a DEA Gamma record 2204 with a DEA TU01 jog box. I am running PC DMIS 2018 R2.

Everything is clean and the air pressure is good. Once it starts running, I have no issues.

The machine was purchased used, so I have no manuals or anything for it.

Parents

KronkGitBasher over 2 years ago

Here, at #2, it seems to be air pressure... but you checked it yet...

Level 3 error code can you help/explain ????? - PC-DMIS User Forum (pcdmisforum.com)

I actually used that thread as a troubleshooting guide. I did have air pressure issues about 4 months ago, with the Z axis, and got the (0x9) code. It was due to a leaking pressure valve and we fixed that. To the best of my knowledge, the air pressure has been good since. I have also had no issues either. Then, it just completely stopped and gave errors with all 3 axis. I think it is something with the controller but, I have nothing to prove it... yet.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

KronkGitBasher over 2 years ago

Here, at #2, it seems to be air pressure... but you checked it yet...

Level 3 error code can you help/explain ????? - PC-DMIS User Forum (pcdmisforum.com)

I actually used that thread as a troubleshooting guide. I did have air pressure issues about 4 months ago, with the Z axis, and got the (0x9) code. It was due to a leaking pressure valve and we fixed that. To the best of my knowledge, the air pressure has been good since. I have also had no issues either. Then, it just completely stopped and gave errors with all 3 axis. I think it is something with the controller but, I have nothing to prove it... yet.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data