Vector Calculation

Hello everyone,
I need to calculate the resultant vector as shown in image attached
Is there a way to do this kind of calculation in PC-DMIS?

Parents

dwade over 2 years ago

Hope that you can understand what I'm doing with this

ASSIGN/V?? = RAD2DEG(ATAN(feat.vector/feat.vector))

L_2 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<-29,-8.219,-0.7>,<0.8659688,-0.500098,0>
ACTL/<-29.013,-8.241,-0.7>,<0.8659982,-0.5000472,0>
CONSTR/LINE,BF,3D,L445_1,L445_2,L445_3,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
ASSIGN/V3=RAD2DEG(ATAN(L_2.I/L_2.J))*-1
F3 =GENERIC/NONE,DEPENDENT,CARTESIAN,OUT,$
NOM/XYZ,<0,0,0>,$
MEAS/XYZ,<-0.35,-13.738,-0.099>,$
NOM/IJK,<0,0,1>,$
MEAS/IJK,<-0.0000651,0.0013219,0.9999991>,$
RADIUS/0,0,$
ANGLE/60,V3,$
DISTANCE/0,0
COMMENT/REPT,
60° angle in top 45° slot
DIM DIM_13A= LOCATION OF PLANE F3 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX MEAS NOMINAL +TOL -TOL DEV OUTTOL
A 59.997 60.000 1.000 1.000 -0.003 0.000 ----#----
END OF DIMENSION DIM_13A

Reply

dwade over 2 years ago

Hope that you can understand what I'm doing with this

ASSIGN/V?? = RAD2DEG(ATAN(feat.vector/feat.vector))

L_2 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO
THEO/<-29,-8.219,-0.7>,<0.8659688,-0.500098,0>
ACTL/<-29.013,-8.241,-0.7>,<0.8659982,-0.5000472,0>
CONSTR/LINE,BF,3D,L445_1,L445_2,L445_3,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
ASSIGN/V3=RAD2DEG(ATAN(L_2.I/L_2.J))*-1
F3 =GENERIC/NONE,DEPENDENT,CARTESIAN,OUT,$
NOM/XYZ,<0,0,0>,$
MEAS/XYZ,<-0.35,-13.738,-0.099>,$
NOM/IJK,<0,0,1>,$
MEAS/IJK,<-0.0000651,0.0013219,0.9999991>,$
RADIUS/0,0,$
ANGLE/60,V3,$
DISTANCE/0,0
COMMENT/REPT,
60° angle in top 45° slot
DIM DIM_13A= LOCATION OF PLANE F3 UNITS=MM ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX MEAS NOMINAL +TOL -TOL DEV OUTTOL
A 59.997 60.000 1.000 1.000 -0.003 0.000 ----#----
END OF DIMENSION DIM_13A

Children

No Data