Wanting some advice on Alignment. I have a part with 5 straight in line holes, the top is a datum. The composite feature frame call for a TP .8 to AD, I created a line between all 5 holes then rotated to that line and set the axis on the datum
If you don't trust those threaded holes to much you could have also made a line on that outside edge and Rotated to that, and still origin to the line created by the holes, either way should work. but I can't see the whole picture, I'm guessing you're limited to what you can display.
If you don't trust those threaded holes to much you could have also made a line on that outside edge and Rotated to that, and still origin to the line created by the holes, either way should work. but I can't see the whole picture, I'm guessing you're limited to what you can display.