hexagon logo
Register Sign in
  • Replies 30 replies
  • Subscribers 19 subscribers
  • Views 605 views
  • Users 0 members are here
Options
Related

Validate my method is fine please (programmers differ in opinion)

Lord_Warfield
Good Morning Interweb,

So I have a simple alignment. Plane A, circle B, circle C. I Leveled to the plane A and origin Z to it. Translate XY to circle B. Rotate to a line made from B to C. Done.

A different programmer believes I must rotate before translating.... I totally disagree on this simple alignment. Using Legacy btw.

Without being degrading... please reply.
Parents
  • I was going through my old level 101 stuff and I found this on auto-align. This is the progressive style alignment.

    1. Measure Plane.
    2. Open alignment dialog box and select Plane.
    3. click auto-align.

    1. Measure Line.
    2. Open alignment dialog box and select Plane and Line.
    3. click auto-align.

    1. Measure Point.
    2. Open alignment dialog box and select Plane, Line, and Point.
    3. click auto-align.

    There is also a note saying that any alignment that constrains all 6 DOF, recalls startup.​​
Reply
  • I was going through my old level 101 stuff and I found this on auto-align. This is the progressive style alignment.

    1. Measure Plane.
    2. Open alignment dialog box and select Plane.
    3. click auto-align.

    1. Measure Line.
    2. Open alignment dialog box and select Plane and Line.
    3. click auto-align.

    1. Measure Point.
    2. Open alignment dialog box and select Plane, Line, and Point.
    3. click auto-align.

    There is also a note saying that any alignment that constrains all 6 DOF, recalls startup.​​
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement