I was running a part that has had a old program on it on a global s 9.15.9 chrome. I found it oot. I was told that part has to be ran on the 7.10.7 global advantage. So I did and found it to be good. Same part same program same head and porbes. Why would this part run good on 1 machine and not on the other? I can run other parts to within a couple tenths of each other on both machines but not this one.
How much of a difference are you seeing in the measurements? Is it one of those times where a feature measures right on the edge of the tolerance on one machine and barely out of tolerance on the other machine? The type of difference that could be explained with random measuring error. Or is it a bigger difference than that?
Big .020 to .090. It looks like the alignment shifted down on the cad. Part frame is off from the cad even after running the part. It's enough it misses features. It's like it has flipped. Vectors. It also looks like the probe is 180 degrees from machine to machine. Hexagon is on top a90b90 on 1 machine and on the bottom on the other.
I am told from other who worked here a long time this happens all the time depending on the part. Its no wonder why management has no faith in the cmms. The guy I replaced just told they thays how cmms and pcdims are. He would then take a few easy feature call them what the drawing said and ship the pars. Management turns a blind eye as money comes in. Now we have new customers and as9102 and they want cmm data and I can not give it with his programs.
Big .020 to .090. It looks like the alignment shifted down on the cad. Part frame is off from the cad even after running the part. It's enough it misses features. It's like it has flipped. Vectors. It also looks like the probe is 180 degrees from machine to machine. Hexagon is on top a90b90 on 1 machine and on the bottom on the other.
I am told from other who worked here a long time this happens all the time depending on the part. Its no wonder why management has no faith in the cmms. The guy I replaced just told they thays how cmms and pcdims are. He would then take a few easy feature call them what the drawing said and ship the pars. Management turns a blind eye as money comes in. Now we have new customers and as9102 and they want cmm data and I can not give it with his programs.
