I have a bit of a delema.
I exported a circle scan in basic script (for the purpose of storing variables) anyway the problem is that if I open up the basic script editor and run the script it won't come back in the way it should and everytime I try to press edit PC DMIS CRASHES ( VERSIONS 4.3 to 2010 MR2).
THIS IS THE ORIGINAL CODE WRITTEN IN PC-DMIS BEFORE IT WAS EXPORTED TO BASIC:
PLN_CYL1 =BASICSCAN/CIRCLE,NUMBER OF HITS=161,SHOW HITS=NO,SHOWALLPARAMS=YES
<CYL1X,CYL1Y,CYL1Z>,CutVec=CUT_I,CUT_J,CUT_K,PLANE
InitVec=INI_I,INI_J,INI_K,DIAM=CYL1DIA+(3.75),ANG=ANGSTRT,ANG=ANGEND,DEPTH=0,THICKNESS=0,PROBECOMP=YES,AVOIDANCE MOVE=NO,DISTANCE=0
FILTER/NULLFILTER,
EXEC MODE=FEATURE,USEHSSDAT=YES,USEDELAYPNTS=NO
BOUNDARY/
HITTYPE/VECTOR
NOMS MODE=MASTER
ENDSCAN
THIS IS THE CODE WHEN I READ IT BACK IN FROM A SCRIPT
PLN_CYL1 =BASICSCAN/CIRCLE,NUMBER OF HITS=401,SHOW HITS=NO,SHOWALLPARAMS=YES
<CYL1X+(DIFFX),CYL1Y+(DIFFY),CYL1Z+(DIFFZ)>,CutVec=CUT_I,CUT_J,CUT_K,PLANE
InitVec=INI_I,INI_J,INI_K,DIAM=CYL1D+(DIFFD),ANG=0,ANG=360,DEPTH=0,THICKNESS=0,PROBECOMP=NO,AVOIDANCE MOVE=NO,DISTANCE=0
EXEC MODE=RELEARN
BOUNDARY/PLANE,<0,0,0>,PlaneVec=0,0,1,Crossings=1
HITTYPE/VECTOR
NOMS MODE=MASTER
ENDSCAN
1. THE FILTER/NULLFILTER IS GONE
2. THE BOUNDRY/? HAS CHANGES
3. THE EXEC MODE HAS CHANGED TO RELEARN
ANY THOUGHTS ?
