Did you guys know about a script or a macro etc.
the automatically input the “+0” code at the end of each
THEO/ dim and the TARG/ dim for example this prevents
The THEO/ and the TARG/ of changing back to Cad nominals
see below…………..
BEFORE
CIR15 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<0,0,4.20>,<0,0,1>,4.1,0
ACTL/<0,0,4.2615>,<0,0,1>,4.1,0
TARG/<0,0,4.2615>,<0,0,1>
START ANG=232,END ANG=305
ANGLE VEC=<1,0,0>
DIRECTION=CCW
AFTER
CIR15 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<0+0,0+0,4.20+0>,<0+0,0+0,1+0>,4.1+0,0+0
ACTL/<0,0,4.2615>,<0,0,1>,4.1,0
TARG/<0+0,0+0,4.20+0>,<0+0,0+0,1+0>
START ANG=232,END ANG=305
ANGLE VEC=<1,0,0>
DIRECTION=CCW
Thanks guys any input will be appreciated
