I'm newish to PC-DMIS, I’m looking for a way to export dimension data from a constructed feature set and report the XYZ and deviation from the theoretical from the points taken from the cad model to a text file after every run.
I’ve manage to work out how to report the point data but I’m stuck on how to report the feature set any ideas?
Dimension Data I’m after (the reported Deviation)... basically I've constructed individual points grouped them as a feature and reported in PC-DMIS which is great until some has asked me for the data so was looking for an output of the raw data X Y Z and the deviation of the points in the feature.
Thanks for the reply, I've tried to download the zip keeps telling me to log in throws me into a loop, might be works internet blocking it. Will try at home.
Dimension Data I’m after (the reported Deviation)... basically I've constructed individual points grouped them as a feature and reported in PC-DMIS which is great until some has asked me for the data so was looking for an output of the raw data X Y Z and the deviation of the points in the feature.
Thanks for the reply, I've tried to download the zip keeps telling me to log in throws me into a loop, might be works internet blocking it. Will try at home.