$$ NO, Here are the ASSIGNMENTS for the X and Z legs of the Circle we need TP for. ASSIGN/V1=ABS(CIR1.X.MEAS+152.5) ASSIGN/V2=ABS(CIR1.Z.MEAS+97.284) $$ NO, Here is the Calulation for the TP ASSIGN/V3=2*(SQRT(V1^2 + V2^2)) $$ NO, Here is one way to construct this feature "no Legs Just results" TP_ITEM32 =FEAT/POINT,CARTESIAN,YES THEO/<0,0,0>,<0,0,1> ACTL/<0.376,0,0>,<0,0,1> CONSTR/POINT,OFFSET,ORIGIN,V3,0,0 $$ NO, Here is another way to construct this feature "Legs and results" MY_ITEM_32 =FEAT/POINT,CARTESIAN,YES THEO/<-152.5,0,-97.284>,<1,0,0> ACTL/<-152.315,0,-97.251>,<0,0,1> CONSTR/POINT,OFFSET,ORIGIN,CIR1.X.MEAS,0,CIR1.Z.MEAS $$ NO, Output just results DIM ITEM32= LOCATION OF POINT TP_ITEM32 UNITS=MM ,$ GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO AX MEAS NOMINAL +TOL -TOL DEV OUTTOL X 0.376 0.000 0.700 0.000 0.376 0.000 ----#---- END OF DIMENSION ITEM32 $$ NO, Out put legs and results DIM ITEM14= POSITION OF POINT MY_ITEM_32 UNITS=MM ,$ GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH FIT TO DATUMS=OFF DEV PERPEN CENTERLINE=OFF DISPLAY=DIAMETER AX MEAS NOMINAL +TOL -TOL BONUS DEV OUTTOL X -152.315 -152.500 0.185 Z -97.251 -97.284 0.033 TP 0.376 RFS 0.700 0.000 0.376 0.000 ----#---- END OF DIMENSION ITEM14