Logic

Hey guys I was wondering if anyone had a quick line of code they could throw my way
for dmis to re-run a feature if it was out of tolerance.

Was thinking about adding it to my A0B0 calibration if it read anything above .0002
To automatically just re-run that tool until it got within the 0.000-.0002 range.
Also to add it to certain programs that if it read it out as it was measuring that it would
at least ask if i wanted to re-measure because it was out.

Thanks

Parents

JEFMAN over 5 years ago

I would try something like this :

ASSIGN/V1=0
DO/
IF V1>0
COMMENT/OPER,NO,FULL SCREEN=YES,AUTO-CONTINUE=NO,
                CLEAN THE TIP AND THE SPHERE !
END IF/
AUTOCALIBRATE/PROBE, PARAMETER_SET=A0B0, QUALTOOL_MOVED=NO,
        SHOW_SUMMARY=NO, OVERWRITE_RESULTSFILE=NO
ASSIGN/V2=PROBEDATA("STANDARDDEVIATION")
ASSIGN/V1=V1+1
UNTIL/V2<0.0002

Ekneel28@gmail.com over 5 years ago in reply to JEFMAN

Do you happen to know the format used for using dimensioning box data?
Example: Like I take a circle then dimension that circle with tolerance.
say I named the dimensioned circle "whatever"
How can I write it out to prompt me if I want to re-meas the circle if the deviation box is triggered?
I've exhausted all my ideas on the logic.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Ekneel28@gmail.com over 5 years ago in reply to JEFMAN

Do you happen to know the format used for using dimensioning box data?
Example: Like I take a circle then dimension that circle with tolerance.
say I named the dimensioned circle "whatever"
How can I write it out to prompt me if I want to re-meas the circle if the deviation box is triggered?
I've exhausted all my ideas on the logic.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data