Your Products have been synced, click here to refresh
IF/D4.X.OUTTOL>0 OR D4.Z.OUTTOL>0 COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, DIM D4 IS OUT OF TOLERANCE. PLEASE ADJUST AND CLICK CONTINUE GOTO/RESTART END_IF/ IF/D5.X.OUTTOL>0 OR D5.Z.OUTTOL>0 COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, DIM D5 IS OUT OF TOLERANCE. PLEASE ADJUST AND CLICK CONTINUE GOTO/RESTART END_IF/
You don't want to use DEV because your part will have deviation from nominal. You want to use the OUTTOL. Before the comments in the IF statements, you may want to add a move point to have the probe back off so it allows the part to be adjusted. You won't need a command to "continue" because if the statement is false, the program will just continue automatically.
IF/D4.X.OUTTOL>0 OR D4.Z.OUTTOL>0 COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, DIM D4 IS OUT OF TOLERANCE. PLEASE ADJUST AND CLICK CONTINUE GOTO/RESTART END_IF/ IF/D5.X.OUTTOL>0 OR D5.Z.OUTTOL>0 COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, DIM D5 IS OUT OF TOLERANCE. PLEASE ADJUST AND CLICK CONTINUE GOTO/RESTART END_IF/
You don't want to use DEV because your part will have deviation from nominal. You want to use the OUTTOL. Before the comments in the IF statements, you may want to add a move point to have the probe back off so it allows the part to be adjusted. You won't need a command to "continue" because if the statement is false, the program will just continue automatically.
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |