Hello all,
Is there a script out there that can check to see if vector points and DMIS feat/points are on the cad surface and
if not, project them onto the nearest cad surface.
Why a script? There are several functions to that end in the interface. Edit->Graphics display window->Point nominal deviation may be the best IMO. Another is Operation->Features->Update nominals from CAD. That one is a bit useful because you can print a report and display the difference visually afterwards if you wish. Like if you need to document the errors in detail.
You can also check find nominals during execution in the list under F5 and run the program offline. I would not recommend that though, too easy to forget to uncheck it and the operator will then get wierd message boxes when running online.
Why a script? There are several functions to that end in the interface. Edit->Graphics display window->Point nominal deviation may be the best IMO. Another is Operation->Features->Update nominals from CAD. That one is a bit useful because you can print a report and display the difference visually afterwards if you wish. Like if you need to document the errors in detail.
You can also check find nominals during execution in the list under F5 and run the program offline. I would not recommend that though, too easy to forget to uncheck it and the operator will then get wierd message boxes when running online.
