PC-DMIS 4.2 Macros

I Do Know You Can't Use A Move Point Within Auto Moves Yet. In Ver. 4.3 You Will Be Able To. But It Is Not Out Yet. They Are Still Testing It.

Here is an example of one hole measurement.

F(AL1)=FEAT/CIRCLE,INNER,CART,759.89,-111.07,727.96,0.9607791,-0.0000002,$
0.2773147,5.32
CALL/EXTERN,DMIS,M(PCD_AUTO_CIRCLE_606),(AL1),755.933,-111.113,726.949,$
0.9607791,-0.0000002,0.2773147,'THEO_THICKNESS',0,'STRAIGHT','LEAST_SQR',$
'NO','BOTH',1,(),(),(),'NO','DISABLED','NO',0,1,1,3,0,90,450,1.5,$
0.2773147,0,-0.9607791,0,0,1,0,0,1,'861.164,235.911,-1068.431,-0.9578975,$
-0.0773916,-0.276483,857.853,236.414,-1066.719,0.2870999,-0.2663525,$
-0.920125,856.068,235.499,-1069.902,0.9578975,0.0773916,0.276483,859.38,$
234.997,-1071.614,-0.2870999,0.2663525,0.920125'


This is the closest match in the PCD_DMIS_Defines.dmi file
M(PCD_AUTO_SURFACE_POINT_606) = MACRO/'id', x, y, z, i, j, k, thickness_type,$
thickness, algorithm, math_type, read_pos_on_error, auto_move, $
auto_move_distance, 'rmeas', read_pos, find_hole, remeasure, n_hits, init, $
perm, spacer, pitch, sang, eang, depth, ang_i, ang_j, ang_k, hits
MODE/AUTO,MAN
RMEAS/CIRCLE,F(id),n_hits,VECBLD,spacer,perm
ENDMES
ENDMAC


But there are also macros in the PCD_DMIS_Defines.dmi file that have the same names, but appear to be to check a slot and a sphere?

M(PCD_AUTO_CIRCLE_606) = MACRO/'id', x, y, z, i, j, k, slot_i, slot_j, $
slot_k, thickness_type, thickness, on_error, auto_move, auto_move_distance, $
'rmeas', read_pos, find_hole, remeasure, init, perm, spacer, depth, minmax, $
corner_radius, hits
MODE/AUTO,MAN
RMEAS/CPARLN,F(id),5,VECBLD,spacer,perm
ENDMES
ENDMAC
$$
M(PCD_AUTO_CIRCLE_606) = MACRO/'id', x, y, z, i, j, k, diam, height, $
thickness_type, thickness, algorithm, on_error, auto_move, $
auto_move_distance, 'rmeas', read_pos, n_hits, n_rows, init, perm, spacer, $
sang, eang, depth, ang_i, ang_j, ang_k, hits
MODE/AUTO,MAN
RMEAS/SPHERE,F(id),n_hits*n_rows,FA(rmeas)
ENDMES
ENDMAC

Does this make sense or is there a new PCD_DMIS_defines.dmi file that will have matching macros?

ha. Saw this article is really good, you write make sense very much. 洒水车 洒水车 洒水车 洒水车 洒水车

whatbe dabda doba bobba.....