Get current tip position to variable in PC-DMIS

Create a read point (Ctrl-G). Assign a variable to equal a pointer to the feature, and then you can refer to the values as variable.X, variable.Y, and variable.Z.

PNT1       =FEAT/POINT,CARTESIAN
            THEO/<1,2,3>,<0,1,0>
            ACTL/<1,2,3>,<0,1,0>
            READPOINT/
            ASSIGN/LOCATION={PNT1}
            ASSIGN/LX=LOCATION.X

Hello everyone,
I have tested the whole thing and have to say that unfortunately I cannot use it. In manual mode, the read point is updated and everything runs as desired. In CNC mode, there is no update, which is absolutely necessary.
Using it in CNC mode is dangerous!
When running the program in CNC mode, the coordinate measuring machine starts to perform undefined movements when assigning the variables!!!!
PC-DMIS for Windows V.2022.1 Build 260 SP2

It absolutely should not be making random moves while the variables are being assigned values. I don't even know where to begin with that. The only thing I can suggest is to set MODE/MANUAL prior to the READPOINT and MODE/DCC after. But again, it should not be making any moves that you haven't programmed.

It absolutely should not be making random moves while the variables are being assigned values. I don't even know where to begin with that. The only thing I can suggest is to set MODE/MANUAL prior to the READPOINT and MODE/DCC after. But again, it should not be making any moves that you haven't programmed.