Does anyone know of a code to add the Bonus Tolerance to the true position value? I.E. if I have the call out TP DIA 0.010 (M) A B(M) C(M) where B and C are diameters each gaining a bonus of .005 in addition to the bonus tolerance of the diametrical feature being .002 so the total bonus would be .012 added to the .010 to give me a total tolerance of .022. Any help would be greatly appreciated.
It does NOT quite work that way. Pcdmis can do this, however, it does NOT leave the hole at 'nominal' but slides the entire part around like on a hard gage to give the final answer, and the deviation of the object hole will be made as close to zero as it can as it 'slides' the part around on the locators.
Does anyone know of a code to add the Bonus Tolerance to the true position value? I.E. if I have the call out TP DIA 0.010 (M) A B(M) C(M) where B and C are diameters each gaining a bonus of .005 in addition to the bonus tolerance of the diametrical feature being .002 so the total bonus would be .012 added to the .010 to give me a total tolerance of .022. Any help would be greatly appreciated.
It does NOT quite work that way. Pcdmis can do this, however, it does NOT leave the hole at 'nominal' but slides the entire part around like on a hard gage to give the final answer, and the deviation of the object hole will be made as close to zero as it can as it 'slides' the part around on the locators.
