Subtract two dimensions and report

I am new to variables and scripting. What would be a simple way to subtract two distance diemnsions and have it show up on the report as a dimension? Thanks J

Parents

benj118 over 16 years ago

assign/v25 = Distavg21.meas
            Assign/v26 = Distavg22.meas
            Assign/v27 = (v25-v26)
Total      =generic/point,dependent,rect,$
            Nom/xyz,0,0,0,$
            Meas/xyz,0,0,v27,$
            Nom/ijk,0,0,1,$
            Meas/ijk,0,0,1
Dim Locavg13= Location Of Point Total  Units=mm ,$
Graph=off  Text=off  Mult=10.00  Output=both
Ax       Meas    Nominal       +tol       -tol        Dev     Outtol
Z       0.017      0.000      0.100     -0.010      0.017      0.000 --#------
End Of Dimension Locavg13

Reply

benj118 over 16 years ago

assign/v25 = Distavg21.meas
            Assign/v26 = Distavg22.meas
            Assign/v27 = (v25-v26)
Total      =generic/point,dependent,rect,$
            Nom/xyz,0,0,0,$
            Meas/xyz,0,0,v27,$
            Nom/ijk,0,0,1,$
            Meas/ijk,0,0,1
Dim Locavg13= Location Of Point Total  Units=mm ,$
Graph=off  Text=off  Mult=10.00  Output=both
Ax       Meas    Nominal       +tol       -tol        Dev     Outtol
Z       0.017      0.000      0.100     -0.010      0.017      0.000 --#------
End Of Dimension Locavg13

Children

No Data