hexagon logo
Register Sign in
  • Replies 14 replies
  • Subscribers 221 subscribers
  • Views 275 views
  • Users 0 members are here
Options
Related

"primary point does not lie on secondary axis, tertiary not allowed"

Probing Pete
Having a small hurdle to overcome here, would greatly appreciate a little advice if you got the time.
Profile of a Surface execution scenerio...(dmis cad, not ++)


Primary -A- = Zplus plane (leveled and z origin)
Secondary -B- = Line on Yminus face, edge of zplus (rotated xplus about zplus and y origin)
Tertiary -C- = circle in hole on Yminus face (x origin)

(As Drawing indicates)

Aligned with CAD, Online

Series of points (contour in an area within zplus), as a Feature Set. FCF set up and defined datums accordingly.
When clicking create, Message window appears which states... "primary point does not lie on secondary axis, tertiary not allowed".

Obviously, I need to correct something here, but am unsure of what, and again would greatly appreciate any advice given.
Thank You.
Parents
  • HI

    Im dragging up a post from the past.

    My question more revolves around whether I should be doing the steps suggested or not.

    I have a 3,2,1 datum system defined on the print, these are labeled A,B,C respectively. I then have a callout for a profile of a surface to A|B|C which then shows the error mentioned in the OP. The B datum, (created using the two points) is certainly the problem as it is clearly at an angle to datum A.

    Wouldn't creating a plane along the line change the datum's and how they function?

    For now I have created the dimension in Legacy but this certain customer does like to see the DRF used, on the report.

    Is it meant to be perpendicular to A?
Reply
  • HI

    Im dragging up a post from the past.

    My question more revolves around whether I should be doing the steps suggested or not.

    I have a 3,2,1 datum system defined on the print, these are labeled A,B,C respectively. I then have a callout for a profile of a surface to A|B|C which then shows the error mentioned in the OP. The B datum, (created using the two points) is certainly the problem as it is clearly at an angle to datum A.

    Wouldn't creating a plane along the line change the datum's and how they function?

    For now I have created the dimension in Legacy but this certain customer does like to see the DRF used, on the report.

    Is it meant to be perpendicular to A?
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement