Hello,
I am trying to add a loop into the program for a multifixture station. Due to the tip angles I can only set this up for 3 parts. The tricky part is the station is basically setup at a triangle, meaning in one row there will be 2 parts with the same x axis about 150mm apart and the 3rd station is located in the center offset about 100mm in +y. Z is the same for all 3 stations.
I know this would be easy if all 3 were in a row or if there were 2 rows of 2 equally spaced but unfortunatly this is not the case.
Also, I will need to setup a variable to allo the operator to input how many parts they want to run because they will not always be running all 3, it could be 1 or 2.
Any gurus out there willing to help me out on this?
