hexagon logo
Register Sign in
  • Replies 22 replies
  • Subscribers 224 subscribers
  • Views 472 views
  • Users 0 members are here
Options
Related

tcp/ip port setting

Andy F.
I am having trouble connecting to my DEA controller on my Global.
Using rs-232 connection I was able to use hyper terminal to show the connections.

READY
SHOW TCPIP
TCP/IP Information

Ctrl Internet Address : 80.128.0.2
Port Number : 0
Host Internet Address : 80.128.0.1
Connection State : listening
Bad IP Checksums : 0
Bad TCP Checksums : 0
Packets Retransmitted : 0

Is there a way to change the port setting remotely? It should be set to 2001, but as you see it is 0 now. The motherboard was changed recently in the controller.
Parents
  • Is it the firmware or only the constant.dat that contains port number ? (i'm not at the cmm to check it...)

    I dont know.
    The engineer told me he did a firmware reinstall and that fixed all our i/o issues with the controller.
    What he actually changed I did not see, I wasn't next to the cmm at the time.
Reply
  • Is it the firmware or only the constant.dat that contains port number ? (i'm not at the cmm to check it...)

    I dont know.
    The engineer told me he did a firmware reinstall and that fixed all our i/o issues with the controller.
    What he actually changed I did not see, I wasn't next to the cmm at the time.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement