hexagon logo
Register Sign in
  • Replies 22 replies
  • Subscribers 224 subscribers
  • Views 588 views
  • Users 0 members are here
Options
Related

tcp/ip port setting

Andy F.
I am having trouble connecting to my DEA controller on my Global.
Using rs-232 connection I was able to use hyper terminal to show the connections.

READY
SHOW TCPIP
TCP/IP Information

Ctrl Internet Address : 80.128.0.2
Port Number : 0
Host Internet Address : 80.128.0.1
Connection State : listening
Bad IP Checksums : 0
Bad TCP Checksums : 0
Packets Retransmitted : 0

Is there a way to change the port setting remotely? It should be set to 2001, but as you see it is 0 now. The motherboard was changed recently in the controller.
Parents
  • In cmd (dos), you can type "ping" + ip adress.
    I guess 169.254.135.111 is the controller adress, so the host should be something like169.254.135.110.

    Thanks for your prompt attention. I am a little confused. How many addresses do we have here? I have the machine interface IP address: 192.9.200.10 and the network card on the back of my computer IP: 169.254.135.111. Which one is host and which one is the controller? I am not sure about the IP 169.254.135.110.

    Thanks
Reply
  • In cmd (dos), you can type "ping" + ip adress.
    I guess 169.254.135.111 is the controller adress, so the host should be something like169.254.135.110.

    Thanks for your prompt attention. I am a little confused. How many addresses do we have here? I have the machine interface IP address: 192.9.200.10 and the network card on the back of my computer IP: 169.254.135.111. Which one is host and which one is the controller? I am not sure about the IP 169.254.135.110.

    Thanks
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement