2000 vintage Mistral 775 / PcDmis V4.2 MR1
This CMM accelerates veeeerrrry slowly, & I think maybe someone has been tinkering with some of the machine parameters.
QUESTION 1 - Under F10, Acceleration, the Maximum Acceleration values are X=0, Y=0, Z=0. Is this correct for this CMM?
QUESTION 2 - Are there other settings I should be looking at?
We too have had issues with speed on our Global. Its one of the fastest machines B&S makes but when the tech looked at our accel settings, we too found them at 175 across the board. Found out the max acceleration rating for this machine was around 1500. Machine moves MUCH better now.
We too have had issues with speed on our Global. Its one of the fastest machines B&S makes but when the tech looked at our accel settings, we too found them at 175 across the board. Found out the max acceleration rating for this machine was around 1500. Machine moves MUCH better now.