Acceleration parameters

So I think I have found dynamics figures for a lot of the recent machines. Unfortunately, not all the source documents can be found in one place, but luckily I have most of this data in one place gathered fron numerous quotes (with exception of Mistral and Scirocco). A few caveats, before we get to the actual numbers:

•USE AT YOUR OWN RISK!!!
•These figures may not apply to all machine sizes for a certain model.
•USE AT YOUR OWN RISK!!!
•These figures do not take into account probing systems, which may impose further limitations.
•USE AT YOUR OWN RISK!!!
•These figures may not be correct at all. All are sourced from Hexagon documents (no third parties), but whose to say if they apply only to certain years of mfg., country, etc.
•USE AT YOUR OWN RISK!!!
•Further limitations may be set in your computer or machine controller. Your mileage may vary.
•USE AT YOUR OWN RISK!!!
•Other machine parameters may have an effect on realized acceleration or traverse speeds. Your mileage may vary.
•USE AT YOUR OWN RISK!!!
•Keep in mind, the 3D speed is all three axis moving at full speed. I have calculated a single-axis speed, which is what needs to be entered in PC-DMIS.
•USE AT YOUR OWN RISK!!!

With all that said, here's what I found:

Global Classic & Performance
•Max Three-dimensional Speed: 520mm/s
•Max Three-dimensional Acceleration: 1732mm/s2
•Max Single-Axis Speed: 300mm/s
•Max Single-Axis Acceleration: 1000mm/s2
(Source: Global Product Line Datasheet, dtd 11/07)

Global Advantage 5.X.X - 15.X.X
•Max Three-dimensional Speed: 866mm/s
•Max Three-dimensional Acceleration: 4330mm/s2
•Max Single-Axis Speed: 500mm/s
•Max Single-Axis Acceleration: 2500mm/s2
(Source: Global product line datasheet dtd 11/07; multiple quotations dtd 9/10 to 2/12)

Global Advantage 12.X.X - 15.X.X
w/Renishaw SP80, or Leitz LSP-X1c, -X3c, or X5 probe
Per recent quote:
•No change to max speed
•Max Three-dimensional Acceleration: 2598mm/s2
•Max Single-Axis Acceleration: 1500mm/s2
Per analog probe parameter datasheet:
•No change to max speed
•Max Three-dimensional Acceleration: 800mm/s2
•Max Single-Axis Acceleration: 460mm/s2
(Source: Global Analog Probe Controller Constants table dtd 05/10; multiple quotations dtd 9/10 to 2/12)

Mistral
•Max Three-dimensional Speed: 433mm/s
•Max Three-dimensional Acceleration: 1000mm/s2
•Max Single-Axis Speed: 250mm/s
•Max Single-Axis Acceleration: 577mm/s2
(Not specified if speed is 3D; will assume it is to be safe)
(Source: "Turbomeca" white paper on Hexagon website accessed 9/12)

Scirocco
•Max Three-dimensional Speed: 666mm/s
•Max Three-dimensional Acceleration: 1600mm/s2
•Max Single-Axis Speed: 385mm/s
•Max Single-Axis Acceleration: 925mm/s2
(Source: "mfg." Brown & Sharpe's corporate magazine dtd winter 1997)

Xcel
•Max Three-dimensional Speed: 500mm/s
•Max Three-dimensional Acceleration: 1000mm/s2
•Max Single-Axis Speed: 290mm/s
•Max Single-Axis Acceleration: 577mm/s2
(Not specified if specs were 3D; will assume they are to be safe)
(Source: "B&R Machine and Tool Corp." white paper on Hexagon website accessed 9/12)

One
•Max Three-dimensional Speed: 520mm/s
•Max Three-dimensional Acceleration: 1732mm/s2
•Max Single-Axis Speed: 300mm/s
•Max Single-Axis Acceleration: 1000mm/s2
(Source: One product line datasheet dtd 11/07)

Reference HP 5.4.3
•Max Three-dimensional Speed: 450mm/s
•Max Three-dimensional Acceleration: 4000mm/s2
•Max Single-Axis Speed: 260mm/s
•Max Single-Axis Acceleration: 2310mm/s2
(Source: Leitz Reference product line datasheet dtd 04/10)

Reference HP/Xi/XT 10.7.6 - 45.12.9
•Max Three-dimensional Speed: 520mm/s
•Max Three-dimensional Acceleration: 4000mm/s2
•Max Single-Axis Speed: 300mm/s
•Max Single-Axis Acceleration: 2310mm/s2
(Source: Leitz Reference product line datasheet dtd 04/10)

So I think I have found dynamics figures for a lot of the recent machines. Unfortunately, not all the source documents can be found in one place, but luckily I have most of this data in one place gathered fron numerous quotes (with exception of Mistral and Scirocco). A few caveats, before we get to the actual numbers:

•USE AT YOUR OWN RISK!!!
•These figures may not apply to all machine sizes for a certain model.
•USE AT YOUR OWN RISK!!!
•These figures do not take into account probing systems, which may impose further limitations.
•USE AT YOUR OWN RISK!!!
•These figures may not be correct at all. All are sourced from Hexagon documents (no third parties), but whose to say if they apply only to certain years of mfg., country, etc.
•USE AT YOUR OWN RISK!!!
•Further limitations may be set in your computer or machine controller. Your mileage may vary.
•USE AT YOUR OWN RISK!!!
•Other machine parameters may have an effect on realized acceleration or traverse speeds. Your mileage may vary.
•USE AT YOUR OWN RISK!!!
•Keep in mind, the 3D speed is all three axis moving at full speed. I have calculated a single-axis speed, which is what needs to be entered in PC-DMIS.
•USE AT YOUR OWN RISK!!!

With all that said, here's what I found:

Global Classic & Performance
•Max Three-dimensional Speed: 520mm/s
•Max Three-dimensional Acceleration: 1732mm/s2
•Max Single-Axis Speed: 300mm/s
•Max Single-Axis Acceleration: 1000mm/s2
(Source: Global Product Line Datasheet, dtd 11/07)

Global Advantage 5.X.X - 15.X.X
•Max Three-dimensional Speed: 866mm/s
•Max Three-dimensional Acceleration: 4330mm/s2
•Max Single-Axis Speed: 500mm/s
•Max Single-Axis Acceleration: 2500mm/s2
(Source: Global product line datasheet dtd 11/07; multiple quotations dtd 9/10 to 2/12)

Global Advantage 12.X.X - 15.X.X
w/Renishaw SP80, or Leitz LSP-X1c, -X3c, or X5 probe
Per recent quote:
•No change to max speed
•Max Three-dimensional Acceleration: 2598mm/s2
•Max Single-Axis Acceleration: 1500mm/s2
Per analog probe parameter datasheet:
•No change to max speed
•Max Three-dimensional Acceleration: 800mm/s2
•Max Single-Axis Acceleration: 460mm/s2
(Source: Global Analog Probe Controller Constants table dtd 05/10; multiple quotations dtd 9/10 to 2/12)

Mistral
•Max Three-dimensional Speed: 433mm/s
•Max Three-dimensional Acceleration: 1000mm/s2
•Max Single-Axis Speed: 250mm/s
•Max Single-Axis Acceleration: 577mm/s2
(Not specified if speed is 3D; will assume it is to be safe)
(Source: "Turbomeca" white paper on Hexagon website accessed 9/12)

Scirocco
•Max Three-dimensional Speed: 666mm/s
•Max Three-dimensional Acceleration: 1600mm/s2
•Max Single-Axis Speed: 385mm/s
•Max Single-Axis Acceleration: 925mm/s2
(Source: "mfg." Brown & Sharpe's corporate magazine dtd winter 1997)

Xcel
•Max Three-dimensional Speed: 500mm/s
•Max Three-dimensional Acceleration: 1000mm/s2
•Max Single-Axis Speed: 290mm/s
•Max Single-Axis Acceleration: 577mm/s2
(Not specified if specs were 3D; will assume they are to be safe)
(Source: "B&R Machine and Tool Corp." white paper on Hexagon website accessed 9/12)

One
•Max Three-dimensional Speed: 520mm/s
•Max Three-dimensional Acceleration: 1732mm/s2
•Max Single-Axis Speed: 300mm/s
•Max Single-Axis Acceleration: 1000mm/s2
(Source: One product line datasheet dtd 11/07)

Reference HP 5.4.3
•Max Three-dimensional Speed: 450mm/s
•Max Three-dimensional Acceleration: 4000mm/s2
•Max Single-Axis Speed: 260mm/s
•Max Single-Axis Acceleration: 2310mm/s2
(Source: Leitz Reference product line datasheet dtd 04/10)

Reference HP/Xi/XT 10.7.6 - 45.12.9
•Max Three-dimensional Speed: 520mm/s
•Max Three-dimensional Acceleration: 4000mm/s2
•Max Single-Axis Speed: 300mm/s
•Max Single-Axis Acceleration: 2310mm/s2
(Source: Leitz Reference product line datasheet dtd 04/10)