Acceleration parameters

2000 vintage Mistral 775 / PcDmis V4.2 MR1
This CMM accelerates veeeerrrry slowly, & I think maybe someone has been tinkering with some of the machine parameters.
QUESTION 1 - Under F10, Acceleration, the Maximum Acceleration values are X=0, Y=0, Z=0. Is this correct for this CMM?
QUESTION 2 - Are there other settings I should be looking at?

Parents

JMB@Barrett over 12 years ago

Thanks to all of you for the input & info. I've been super busy & just now checked the thread.
It sounds like I should go with 175. It seems reasonanble & I have run it at 100 with no problems. It will definately be a big improvement over the '0' I'm finding in some of the programs. You wouldn't believe what I find in some of these programs... alignments to features that no longer exist, etc. etc.
Thanks again!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

JMB@Barrett over 12 years ago

Thanks to all of you for the input & info. I've been super busy & just now checked the thread.
It sounds like I should go with 175. It seems reasonanble & I have run it at 100 with no problems. It will definately be a big improvement over the '0' I'm finding in some of the programs. You wouldn't believe what I find in some of these programs... alignments to features that no longer exist, etc. etc.
Thanks again!
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data