Another instance of my programmer and I butting heads. First off, I want to ask... Is an alignment needed to measure the concentricity of 2 circles? If so, can a proper alignment be made with paint on the plane that we are leveling the part to? He says that even with paint (very uneven paint) on the part, the concentricity will be accurate. Again, be gentle.
I would suggest you need an alignment to measure accurately in the first place. I only report conc as cylinder to cylinder as that is how I understand it should be used. The alignment comes from your reference feature when you construct it. I use runout for just a circle where possible. (I am a newbie).
I would suggest you need an alignment to measure accurately in the first place. I only report conc as cylinder to cylinder as that is how I understand it should be used. The alignment comes from your reference feature when you construct it. I use runout for just a circle where possible. (I am a newbie).
