True Position of Notched Slot

I'm tryijng to create a program to measure 3 notched slots and report their true position. I have included pictures of the features from the print as I'm sure I wouldn't be able to explain it in words.

One of the slots is datum C and is TP'd to A (datum A is the top plane) and B while the other 2 slots are to A B and C. The intent of the engineer is to have a .002 TP only on the angle of the slot, the depth of the slot is controlled by .303 +/-.005.
Using the notched slot auto feature, I contruct the true position and use the angle in the advanced tab. Is there a way to have it not use the radius?
Any assistance would be greatly appreciated.

Attached Files

Parents

CMMGUY13 over 11 years ago

Auto slot (square/rounded) should suffice when trying to dimension for True Position, just be sure to clean up your theo's....I use auto feature all the time for this and it works like a charm. The only issue you may have, depending on the year of your machine and type is whether to use Legacy mode or exact mode.....
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

CMMGUY13 over 11 years ago

Auto slot (square/rounded) should suffice when trying to dimension for True Position, just be sure to clean up your theo's....I use auto feature all the time for this and it works like a charm. The only issue you may have, depending on the year of your machine and type is whether to use Legacy mode or exact mode.....
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data