hexagon logo
Register Sign in
  • Replies 13 replies
  • Subscribers 222 subscribers
  • Views 167 views
  • Users 0 members are here
Options
Related

True position of... length?

Erikir
I have a round slot, 17 mm from edge of radius to edge of radius and 4mm wide.

My drawing says
17 +/- 0.3
|TP|0.5 MMC |A|B|C| (length)
Boundary

4+/- 0.3
|TP|0.2 MMC |A|B|C| (width)
Boundary

How do I report that?
Parents
  • You should use the vector of the slot as tolerance zone for the TP. Depending on how the leader lines are connecting to the slot, they also depict the tolerance zone for you to use (at least thats the way it's done in ISO-land). Often these leader lines are connected either parallell or perpendicular to the slot, meaning that the direction of the slot tells you the direction of the tolerance zone. Extra important when there is a TP in one axis (non-Ø tolerance zone).
Reply
  • You should use the vector of the slot as tolerance zone for the TP. Depending on how the leader lines are connecting to the slot, they also depict the tolerance zone for you to use (at least thats the way it's done in ISO-land). Often these leader lines are connected either parallell or perpendicular to the slot, meaning that the direction of the slot tells you the direction of the tolerance zone. Extra important when there is a TP in one axis (non-Ø tolerance zone).
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement