hexagon logo
Register Sign in
  • Replies 10 replies
  • Subscribers 224 subscribers
  • Views 172 views
  • Users 0 members are here
Options
Related

Extracting assignments from fcf's that hold multiple features

TIMSHARMAN
Hi there
I have a single feature control frame that tolerances 31 holes (FCFLOC15) I would like to extract each holes deviation from nominal position via assignments to do this normally I would
use the following assignment "ASSIGN/V1=FCFLOC15.Z.DEV" the only trouble is this only gives the deviation for the 1st hole in FCFLOC15 how if possible can you extract the other
30 'Z' deviations is there some sort of extension to go after the FCFLOC15 ?
Regards Tim.
Parents
  • Here is the code:-

    COMMENT/REPT,
    ********************************************************************************************************
    DIAMETER AND POSITION OF THE THIRTY 9.011mm HOLE'S IN RELATION TO DATUM'S 'C AND D' AS PER SECTION AM-AM
    EXCEPT HOLE DESIGNATED AS HOLE AN
    ***NOTE HOLE IS NOT MEASURED ON INNER RADIUS AS PER DRAWING BECAUSE OF PROBE SHANKING ERROR'S
    IT IS MEASURED ON OUTER RADIUS WHICH SHOULD BE POSITIONED RELATIVE TO HOLE ON INNER RADIUS***
    ***(NOTE HOLE'S 1 TO 9, ANGLE'S ARE BASED FROM 360°)***
    ********************************************************************************************************
    COMMENT/REPT,
    ***BALLOONED DRAWING NUMBER'S 85 AND 89***
    CAD_ALIGN =ALIGNMENT/START,RECALL:CAB_ALIGN,LIST=YES
    ALIGNMENT/ROTATE_CIRCLE,XPLUS,TO,CTR_POINT,AND,VESPAL_10,ABOUT,ZPLUS
    ALIGNMENT/END
    FCFLOC15 =POSITION : VESPAL_1,VESPAL_2,VESPAL_3,...
    FEATCTRLFRAME/SHOWNOMS=YES,SHOWPARAMS=YES,SHOWEXPANDED=YES
    CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
    COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Current Alignment
    CUSTOMIZED DRF=NO
    STANDARDTYPE=ISO_1101
    SIZE TOLERANCES/30,DIAMETER,9.011,0.011,0.011
    PRIMARY DIMENSION/POSITION,DIAMETER,0.3,<MC>,C,D,<dat>
    SECONDARY DIMENSION/<Dim>,<D>,<tol>,<MC>,D,<dat>,<dat>
    NOTE/FCFLOC15
    FEATURES/VESPAL_1,VESPAL_2,VESPAL_3,VESPAL_4,VESPAL_5,
    VESPAL_6,VESPAL_7,VESPAL_8,VESPAL_9,VESPAL_11,
    VESPAL_12,VESPAL_13,VESPAL_14,VESPAL_15,
    VESPAL_16,VESPAL_17,VESPAL_18,VESPAL_19,
    VESPAL_20,VESPAL_21,VESPAL_22,VESPAL_23,
    VESPAL_24,VESPAL_25,VESPAL_26,VESPAL_27,
    VESPAL_28,VESPAL_29,VESPAL_30,VESPAL_31,,
    Set
    <NEW>
    VESPAL_1
    Z:NOM=11.5
    PA:NOM=307.742
    <NEW>
    VESPAL_2
    Z:NOM=11.5
    PA:NOM=313.548
    <NEW>
    VESPAL_3
    Z:NOM=11.5
    PA:NOM=319.355
    <NEW>
    VESPAL_4
    Z:NOM=11.5
    PA:NOM=325.161
    <NEW>
    VESPAL_5
    Z:NOM=11.5
    PA:NOM=330.968
    <NEW>
    VESPAL_6
    Z:NOM=11.5
    PA:NOM=336.774
    <NEW>
    VESPAL_7
    Z:NOM=11.5
    PA:NOM=342.581
    <NEW>
    VESPAL_8
    Z:NOM=11.5
    PA:NOM=348.387
    <NEW>
    VESPAL_9
    Z:NOM=11.5
    PA:NOM=354.194
    <NEW>
    VESPAL_11
    Z:NOM=11.5
    PA:NOM=5.806
    <NEW>
    VESPAL_12
    Z:NOM=11.5
    PA:NOM=11.613
    <NEW>
    VESPAL_13
    Z:NOM=11.5
    PA:NOM=17.419
    <NEW>
    VESPAL_14
    Z:NOM=11.5
    PA:NOM=23.226
    <NEW>
    VESPAL_15
    Z:NOM=11.5
    PA:NOM=29.032
    <NEW>
    VESPAL_16
    Z:NOM=11.5
    PA:NOM=34.839
    <NEW>
    VESPAL_17
    Z:NOM=11.5
    PA:NOM=40.645
    <NEW>
    VESPAL_18
    Z:NOM=11.5
    PA:NOM=46.452
    <NEW>
    VESPAL_19
    Z:NOM=11.5
    PA:NOM=52.258
    <NEW>
    VESPAL_20
    Z:NOM=11.5
    PA:NOM=58.064
    <NEW>
    VESPAL_21
    Z:NOM=11.5
    PA:NOM=63.871
    <NEW>
    VESPAL_22
    Z:NOM=11.5
    PA:NOM=69.677
    <NEW>
    VESPAL_23
    Z:NOM=11.5
    PA:NOM=75.484
    <NEW>
    VESPAL_24
    Z:NOM=11.5
    PA:NOM=81.29
    <NEW>
    VESPAL_25
    Z:NOM=11.5
    PA:NOM=87.097
    <NEW>
    VESPAL_26
    Z:NOM=11.5
    PA:NOM=92.903
    <NEW>
    VESPAL_27
    Z:NOM=11.5
    PA:NOM=98.71
    <NEW>
    VESPAL_28
    Z:NOM=11.5
    PA:NOM=104.516
    <NEW>
    VESPAL_29
    Z:NOM=11.5
    PA:NOM=110.323
    <NEW>
    VESPAL_30
    Z:NOM=11.5
    PA:NOM=116.129
    <NEW>
    VESPAL_31
    Z:NOM=11.5
    PA:NOM=121.936
    <NEW>
    COMMENT/REPT,
    ************************************************************************
    ************************************************************************
    Tim.
Reply
  • Here is the code:-

    COMMENT/REPT,
    ********************************************************************************************************
    DIAMETER AND POSITION OF THE THIRTY 9.011mm HOLE'S IN RELATION TO DATUM'S 'C AND D' AS PER SECTION AM-AM
    EXCEPT HOLE DESIGNATED AS HOLE AN
    ***NOTE HOLE IS NOT MEASURED ON INNER RADIUS AS PER DRAWING BECAUSE OF PROBE SHANKING ERROR'S
    IT IS MEASURED ON OUTER RADIUS WHICH SHOULD BE POSITIONED RELATIVE TO HOLE ON INNER RADIUS***
    ***(NOTE HOLE'S 1 TO 9, ANGLE'S ARE BASED FROM 360°)***
    ********************************************************************************************************
    COMMENT/REPT,
    ***BALLOONED DRAWING NUMBER'S 85 AND 89***
    CAD_ALIGN =ALIGNMENT/START,RECALL:CAB_ALIGN,LIST=YES
    ALIGNMENT/ROTATE_CIRCLE,XPLUS,TO,CTR_POINT,AND,VESPAL_10,ABOUT,ZPLUS
    ALIGNMENT/END
    FCFLOC15 =POSITION : VESPAL_1,VESPAL_2,VESPAL_3,...
    FEATCTRLFRAME/SHOWNOMS=YES,SHOWPARAMS=YES,SHOWEXPANDED=YES
    CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
    COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Current Alignment
    CUSTOMIZED DRF=NO
    STANDARDTYPE=ISO_1101
    SIZE TOLERANCES/30,DIAMETER,9.011,0.011,0.011
    PRIMARY DIMENSION/POSITION,DIAMETER,0.3,<MC>,C,D,<dat>
    SECONDARY DIMENSION/<Dim>,<D>,<tol>,<MC>,D,<dat>,<dat>
    NOTE/FCFLOC15
    FEATURES/VESPAL_1,VESPAL_2,VESPAL_3,VESPAL_4,VESPAL_5,
    VESPAL_6,VESPAL_7,VESPAL_8,VESPAL_9,VESPAL_11,
    VESPAL_12,VESPAL_13,VESPAL_14,VESPAL_15,
    VESPAL_16,VESPAL_17,VESPAL_18,VESPAL_19,
    VESPAL_20,VESPAL_21,VESPAL_22,VESPAL_23,
    VESPAL_24,VESPAL_25,VESPAL_26,VESPAL_27,
    VESPAL_28,VESPAL_29,VESPAL_30,VESPAL_31,,
    Set
    <NEW>
    VESPAL_1
    Z:NOM=11.5
    PA:NOM=307.742
    <NEW>
    VESPAL_2
    Z:NOM=11.5
    PA:NOM=313.548
    <NEW>
    VESPAL_3
    Z:NOM=11.5
    PA:NOM=319.355
    <NEW>
    VESPAL_4
    Z:NOM=11.5
    PA:NOM=325.161
    <NEW>
    VESPAL_5
    Z:NOM=11.5
    PA:NOM=330.968
    <NEW>
    VESPAL_6
    Z:NOM=11.5
    PA:NOM=336.774
    <NEW>
    VESPAL_7
    Z:NOM=11.5
    PA:NOM=342.581
    <NEW>
    VESPAL_8
    Z:NOM=11.5
    PA:NOM=348.387
    <NEW>
    VESPAL_9
    Z:NOM=11.5
    PA:NOM=354.194
    <NEW>
    VESPAL_11
    Z:NOM=11.5
    PA:NOM=5.806
    <NEW>
    VESPAL_12
    Z:NOM=11.5
    PA:NOM=11.613
    <NEW>
    VESPAL_13
    Z:NOM=11.5
    PA:NOM=17.419
    <NEW>
    VESPAL_14
    Z:NOM=11.5
    PA:NOM=23.226
    <NEW>
    VESPAL_15
    Z:NOM=11.5
    PA:NOM=29.032
    <NEW>
    VESPAL_16
    Z:NOM=11.5
    PA:NOM=34.839
    <NEW>
    VESPAL_17
    Z:NOM=11.5
    PA:NOM=40.645
    <NEW>
    VESPAL_18
    Z:NOM=11.5
    PA:NOM=46.452
    <NEW>
    VESPAL_19
    Z:NOM=11.5
    PA:NOM=52.258
    <NEW>
    VESPAL_20
    Z:NOM=11.5
    PA:NOM=58.064
    <NEW>
    VESPAL_21
    Z:NOM=11.5
    PA:NOM=63.871
    <NEW>
    VESPAL_22
    Z:NOM=11.5
    PA:NOM=69.677
    <NEW>
    VESPAL_23
    Z:NOM=11.5
    PA:NOM=75.484
    <NEW>
    VESPAL_24
    Z:NOM=11.5
    PA:NOM=81.29
    <NEW>
    VESPAL_25
    Z:NOM=11.5
    PA:NOM=87.097
    <NEW>
    VESPAL_26
    Z:NOM=11.5
    PA:NOM=92.903
    <NEW>
    VESPAL_27
    Z:NOM=11.5
    PA:NOM=98.71
    <NEW>
    VESPAL_28
    Z:NOM=11.5
    PA:NOM=104.516
    <NEW>
    VESPAL_29
    Z:NOM=11.5
    PA:NOM=110.323
    <NEW>
    VESPAL_30
    Z:NOM=11.5
    PA:NOM=116.129
    <NEW>
    VESPAL_31
    Z:NOM=11.5
    PA:NOM=121.936
    <NEW>
    COMMENT/REPT,
    ************************************************************************
    ************************************************************************
    Tim.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement