Extracting assignments from fcf's that hold multiple features

Hi there
I have a single feature control frame that tolerances 31 holes (FCFLOC15) I would like to extract each holes deviation from nominal position via assignments to do this normally I would
use the following assignment "ASSIGN/V1=FCFLOC15.Z.DEV" the only trouble is this only gives the deviation for the 1st hole in FCFLOC15 how if possible can you extract the other
30 'Z' deviations is there some sort of extension to go after the FCFLOC15 ?
Regards Tim.

Parents

SABarber over 10 years ago

FCFLOC18 =POSITION : 4CIR1,4CIR2,4CIR3,...
            FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
            CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=0.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
            COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
            CUSTOMIZED DRF=NO
            STANDARDTYPE=ASME_Y14_5
              SIZE TOLERANCES/4,DIAMETER,15,0.025,0.025
              PRIMARY DIMENSION/POSITION,<D>,0.025,MMC,PZ,LX,C1,<MC>
              SECONDARY DIMENSION/<Dim>,<D>,<tol>,PZ,LX,<dat>
              NOTE/FCFLOC18
            FEATURES/4CIR1,4CIR2,4CIR3,4CIR4,,
            ASSIGN/V1=GETTEXT(662, 1, {FCFLOC18})
            ASSIGN/V2=GETTEXT(662, 2, {FCFLOC18})
            ASSIGN/V3=GETTEXT(662, 3, {FCFLOC18})
            ASSIGN/V4=GETTEXT(662, 4, {FCFLOC18})

Reply

SABarber over 10 years ago

FCFLOC18 =POSITION : 4CIR1,4CIR2,4CIR3,...
            FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
            CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=0.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
            COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
            CUSTOMIZED DRF=NO
            STANDARDTYPE=ASME_Y14_5
              SIZE TOLERANCES/4,DIAMETER,15,0.025,0.025
              PRIMARY DIMENSION/POSITION,<D>,0.025,MMC,PZ,LX,C1,<MC>
              SECONDARY DIMENSION/<Dim>,<D>,<tol>,PZ,LX,<dat>
              NOTE/FCFLOC18
            FEATURES/4CIR1,4CIR2,4CIR3,4CIR4,,
            ASSIGN/V1=GETTEXT(662, 1, {FCFLOC18})
            ASSIGN/V2=GETTEXT(662, 2, {FCFLOC18})
            ASSIGN/V3=GETTEXT(662, 3, {FCFLOC18})
            ASSIGN/V4=GETTEXT(662, 4, {FCFLOC18})

Children

No Data