Having problems doing a linear closed scan on a curved slot using a touch probe. It is only taking one point while running offline. I've tried changing the Noms mode from MASTER to Find Noms and the Boundary type from Sphere to Plane with no change in behavior. My ultimate goal with this is to report profile on the slot.
MOVE/CLEARPLANE
SCN1 =FEAT/SCAN,LINEARCLOSE,NUMBER OF HITS=0
,SHOW HITS=YES,SHOWALLPARAMS=YES
EXEC MODE=NORMAL, NOMS MODE=FIND NOMS,CLEARPLANE=YES,SINGLE POINT=NO,THICKNESS=0
FINDNOMS=0.6,SELECTEDONLY=NO,USEBESTFIT=NO,PROBECOMP=YES,AVOIDANCE MOVE=NO,DISTANCE=0,CAD Compensation=YES
DIR1=VARIABLE,MAX INCR=0.2,MIN INCR=0.1,MAX ANGLE=10,MIN ANGLE=3
HITTYPE=VECTOR
INITVEC=0.1535076,0,-0.9881475
DIRVEC=-0.9722863,0,-0.2337935
CUTVEC=0,-1,0
PLANEVEC=-0.972258,0.0076266,-0.2337867
POINT1=-7.245,11.425,46.924
MEAS/SCAN
BASICSCAN/LINE,NUMBER OF HITS=0,SHOW HITS=YES,SHOWALLPARAMS=YES
<-7.245,11.425,46.924>,<-7.245,11.425,46.924>,CutVec=0,-1,0,DirVec=-0.9722863,0,-0.2337935
InitVec=0.1535076,0,-0.9881475,EndVec=0.1535076,0,-0.9881475,THICKNESS=0
FILTER/VARIABLE,0.2,0.1,10,3
EXEC MODE=NORMAL
BOUNDARY/SPHERE,<-7.245,11.425,46.924>,EndVec=0.1535076,0,-0.9881475,0.1,Crossings=2
HITTYPE/VECTOR
NOMS MODE=MASTER
ENDSCAN
ENDMEAS/
