Its me again, with another newbie question. Im still a novice to PC DMIS, having only taken the Level 1 CAD class to this point. Lets say I have a part lined up with the CAD model. However there is significant warp to the part so that when I go to measure another feature elsewhere from my original alignment, its way off the CAD model giving me misses and crashes. Is there a way to line features back up? That is to say, try and tell PC DMIS that the CAD feature is actually over here on this part?
LOL, I wish I could use a tape measure. Thanks for all the advice, it was helpful. I deal with a lot of parts that get bolted to something or vibra or sonic welded to something. Unbelievably major warp isnt a concern in parts like this, so I deal with a lot of warped parts.
LOL, I wish I could use a tape measure. Thanks for all the advice, it was helpful. I deal with a lot of parts that get bolted to something or vibra or sonic welded to something. Unbelievably major warp isnt a concern in parts like this, so I deal with a lot of warped parts.
