hello there! so i've been having problems fixing this true position dimension. say the part location, on x and y are 1.0 x 1.0 true position of .005. but if my nominal says its 1.005 x 1.007 and i can't change that! because my actual readings are of 1.001 x 1.003. so because i cannot change my nominals, the report states its out of print. I already went and changed the nominals manually on the program. also on the advanced tap on true position, checked and unchecked "update feature nominal" but nothing seems to change those numbers. Any help will be appreciated. Thank you.
What are the nominals in the feature compared to nominals in the dimension? Posting code on the forum would help us figure out whats going on in your program.
OKAY, SO IT SEEMS THAT IT WAS JUST A MATTER OF CLICKING THE TAB BUTTON AND IT CHANGES IT:/. BUT THAT'S ON A SINGLE FEATURE, IF I GROUP THEM TOGETHER IT STILL DOESN'T CHANGE IT NO MATTER WHAT I DO.
HERE'S THE CODE:
(THIS ONE IS INDIVIDUALLY)
FCFLOC1 =POSITION : CIR6
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=IN
COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
SIZE TOLERANCES/1,DIAMETER,0.252,0.001,0.001
PRIMARY DIMENSION/POSITION,DIAMETER,0.005,MMC,C,A,<MC>,<dat>
SECONDARY DIMENSION/<Dim>,<tol>,<MC>,<dat>,<dat>,<dat>
NOTE/FCFLOC1
FEATURES/CIR6,,
(AS A GROUP, IT SHOWS IT WAY OUT)
FCFLOC5 =POSITION : CIR6,CIR7,CIR8,...
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=IN
COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Current Alignment
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
SIZE TOLERANCES/4,DIAMETER,0.252,0.001,0.001
PRIMARY DIMENSION/POSITION,DIAMETER,0.005,MMC,C,A,<MC>,<dat>
SECONDARY DIMENSION/<Dim>,<tol>,<MC>,C,A,<MC>,<dat>
NOTE/FCFLOC5
FEATURES/CIR6,CIR7,CIR8,CIR9,,
What are the nominals in the feature compared to nominals in the dimension? Posting code on the forum would help us figure out whats going on in your program.
OKAY, SO IT SEEMS THAT IT WAS JUST A MATTER OF CLICKING THE TAB BUTTON AND IT CHANGES IT:/. BUT THAT'S ON A SINGLE FEATURE, IF I GROUP THEM TOGETHER IT STILL DOESN'T CHANGE IT NO MATTER WHAT I DO.
HERE'S THE CODE:
(THIS ONE IS INDIVIDUALLY)
FCFLOC1 =POSITION : CIR6
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=IN
COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
SIZE TOLERANCES/1,DIAMETER,0.252,0.001,0.001
PRIMARY DIMENSION/POSITION,DIAMETER,0.005,MMC,C,A,<MC>,<dat>
SECONDARY DIMENSION/<Dim>,<tol>,<MC>,<dat>,<dat>,<dat>
NOTE/FCFLOC1
FEATURES/CIR6,,
(AS A GROUP, IT SHOWS IT WAY OUT)
FCFLOC5 =POSITION : CIR6,CIR7,CIR8,...
FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=IN
COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Current Alignment
CUSTOMIZED DRF=NO
STANDARDTYPE=ASME_Y14_5
SIZE TOLERANCES/4,DIAMETER,0.252,0.001,0.001
PRIMARY DIMENSION/POSITION,DIAMETER,0.005,MMC,C,A,<MC>,<dat>
SECONDARY DIMENSION/<Dim>,<tol>,<MC>,C,A,<MC>,<dat>
NOTE/FCFLOC5
FEATURES/CIR6,CIR7,CIR8,CIR9,,
