hexagon logo
Register Sign in
  • Replies 6 replies
  • Subscribers 221 subscribers
  • Views 99 views
  • Users 0 members are here
Options
Related

true position problems!!

ilomeli90
hello there! so i've been having problems fixing this true position dimension. say the part location, on x and y are 1.0 x 1.0 true position of .005. but if my nominal says its 1.005 x 1.007 and i can't change that! because my actual readings are of 1.001 x 1.003. so because i cannot change my nominals, the report states its out of print. I already went and changed the nominals manually on the program. also on the advanced tap on true position, checked and unchecked "update feature nominal" but nothing seems to change those numbers. Any help will be appreciated. Thank you.
Parents
  • FIT TO DATUMS= YES
    Should be NO unless the Datums also have modifiers. If the Position tolerance specifies MMC or LMC, then that only applies to the feature, not the datums.

    OUTPUT ALIGNMENT= Datum Reference Frame
    Should perhaps be Current Alignment

    oh okay thank you, that kind of helped. still having problems with the cylinders, but i could just output them as single circles. thank you sir, much appreciated!Slight smile
Reply
  • FIT TO DATUMS= YES
    Should be NO unless the Datums also have modifiers. If the Position tolerance specifies MMC or LMC, then that only applies to the feature, not the datums.

    OUTPUT ALIGNMENT= Datum Reference Frame
    Should perhaps be Current Alignment

    oh okay thank you, that kind of helped. still having problems with the cylinders, but i could just output them as single circles. thank you sir, much appreciated!Slight smile
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement