My first question is this: By changing the TARG "X" values for each subsequent vector point, is this, in effect, moving the probe along the surface in the X direction? That is, does this code take actual hits in different locations? Even though the THEO values are EXACTLY the same? This part of the program is attempting to measure the D.O. between two vanes.
My second question: If this is indeed "scanning" along the surface, I'm wondering why this approach is advantageous over , say, just changing the THEO value from point to point.
First post. Appreciate any insight.
B-B13 =ALIGNMENT/START,RECALL:V2 H9-H9 B/F,LIST=YES
ALIGNMENT/ROTATE_OFFSET,-23.2,ABOUT,ZPLUS
ALIGNMENT/END
V1 H9 DO CV-1=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<48.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<48.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-1= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-1,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 12.92872 <--------
V1 H9 DO CV-2=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<48.32,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<48.32,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-2= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-2,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 12.93543 <--------
V1 H9 DO CV-3=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<48.07,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<48.07,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-3= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-3,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 12.92836 <--------
V1 H9 DO CV-4=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<47.82,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<47.82,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-4= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-4,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 12.92612 <--------
V1 H9 DO CV-5=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<47.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<47.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-5= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-5,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 12.92872 <--------
V1 H9 DO CV-6=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-6= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-6,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 12.93633 <--------
V1 H9 DO CV-7=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<47.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<47.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-7= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-7,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 12.94292 <--------
V1 H9 DO CV-8=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<46.92,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<46.92,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-8= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-8,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 12.95806 <--------
V1 H9 DO CV-9=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<46.67,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<46.67,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-9= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-9,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 12.97800 <--------
V1 H9 DO CV-10=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<46.42,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<46.42,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-10= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-10,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 13.00272 <--------
V1 H9 DO CV-11=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
ACTL/<46.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
TARG/<46.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
SNAP=YES
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=NO,DISTANCE=0
SHOW HITS=NO
DIM H9-H9 DO-11= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-11,SHORTEST=OFF,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS
M 13.32481 0.20000 0.20000 13.03219 <--------
