hexagon logo
Register Sign in
  • Replies 8 replies
  • Subscribers 222 subscribers
  • Views 177 views
  • Users 0 members are here
Options
Related

Do changing Target Pts "move" the probe along a surface?

NeverSayNever
I'm having problems understanding the code below.

My first question is this: By changing the TARG "X" values for each subsequent vector point, is this, in effect, moving the probe along the surface in the X direction? That is, does this code take actual hits in different locations? Even though the THEO values are EXACTLY the same? This part of the program is attempting to measure the D.O. between two vanes.

My second question: If this is indeed "scanning" along the surface, I'm wondering why this approach is advantageous over , say, just changing the THEO value from point to point.

First post. Appreciate any insight. 


B-B13      =ALIGNMENT/START,RECALL:V2 H9-H9 B/F,LIST=YES
            ALIGNMENT/ROTATE_OFFSET,-23.2,ABOUT,ZPLUS
            ALIGNMENT/END
V1 H9 DO CV-1=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<48.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<48.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-1= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-1,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   12.92872 <--------
V1 H9 DO CV-2=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<48.32,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<48.32,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-2= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-2,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   12.93543 <--------
V1 H9 DO CV-3=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<48.07,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<48.07,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-3= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-3,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   12.92836 <--------
V1 H9 DO CV-4=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.82,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.82,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
           SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-4= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-4,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   12.92612 <--------
V1 H9 DO CV-5=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-5= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-5,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   12.92872 <--------
V1 H9 DO CV-6=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-6= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-6,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   12.93633 <--------
V1 H9 DO CV-7=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-7= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-7,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   12.94292 <--------
V1 H9 DO CV-8=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<46.92,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.92,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-8= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-8,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   12.95806 <--------
V1 H9 DO CV-9=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<46.67,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.67,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-9= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-9,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   12.97800 <--------
V1 H9 DO CV-10=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<46.42,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.42,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-10= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-10,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.00272 <--------
V1 H9 DO CV-11=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<46.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-11= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-11,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.03219 <--------
Parents
  • Can some please explain these ACTUAL results to me?

    It looks to me like the intent here was to inspect .050" on either side of the THEO point, using the TARG "X" value as an offset. We just now measured this on the CMM. If the TARG X value is changing .25mm every point (.010"), how come my ACTL "X" values are always the same? I don't understand. I would expect the ACTL X values to be very close to the TARG "X" values. No? 

    V1 H9 DO CV-2=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.0089,-37.84025>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<48.32,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-2= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-2,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.07722 <--------
V1 H9 DO CV-3=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.01301,-37.84116>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<48.07,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-3= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-3,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.07307 <--------
V1 H9 DO CV-4=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02334,-37.84346>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.82,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-4= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-4,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.06264 <--------
V1 H9 DO CV-5=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02239,-37.84325>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-5= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-5,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.06360 <--------
V1 H9 DO CV-6=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02777,-37.84445>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-6= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-6,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.05816 <--------
V1 H9 DO CV-7=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.03272,-37.84555>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-7= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-7,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.05316 <--------
V1 H9 DO CV-8=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.04006,-37.84719>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.92,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-8= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-8,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.04574 <--------
V1 H9 DO CV-9=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02943,-37.84482>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.67,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-9= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-9,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.05648 <--------
V1 H9 DO CV-10=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02358,-37.84352>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.42,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-10= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-10,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.06239 <--------
V1 H9 DO CV-11=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.01978,-37.84267>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-11= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-11,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.06623
    <--------
Reply
  • Can some please explain these ACTUAL results to me?

    It looks to me like the intent here was to inspect .050" on either side of the THEO point, using the TARG "X" value as an offset. We just now measured this on the CMM. If the TARG X value is changing .25mm every point (.010"), how come my ACTL "X" values are always the same? I don't understand. I would expect the ACTL X values to be very close to the TARG "X" values. No? 

    V1 H9 DO CV-2=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.0089,-37.84025>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<48.32,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-2= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-2,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.07722 <--------
V1 H9 DO CV-3=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.01301,-37.84116>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<48.07,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-3= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-3,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.07307 <--------
V1 H9 DO CV-4=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02334,-37.84346>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.82,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-4= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-4,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.06264 <--------
V1 H9 DO CV-5=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02239,-37.84325>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.57,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-5= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-5,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.06360 <--------
V1 H9 DO CV-6=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02777,-37.84445>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-6= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-6,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.05816 <--------
V1 H9 DO CV-7=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.03272,-37.84555>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<47.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-7= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-7,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.05316 <--------
V1 H9 DO CV-8=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.04006,-37.84719>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.92,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-8= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-8,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.04574 <--------
V1 H9 DO CV-9=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02943,-37.84482>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.67,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-9= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-9,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.05648 <--------
V1 H9 DO CV-10=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.02358,-37.84352>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.42,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-10= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-10,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.06239 <--------
V1 H9 DO CV-11=FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<47.31527,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            ACTL/<47.3151,6.01978,-37.84267>,<-0.0009674,0.9760714,-0.2174481>
            TARG/<46.17,5.83643,-37.80182>,<-0.0009674,0.9760714,-0.2174481>
            SNAP=YES
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              AVOIDANCE MOVE=NO,DISTANCE=0
            SHOW HITS=NO
DIM H9-H9 DO-11= 3D DISTANCE FROM POINT V1 H9 DO TE-1 TO POINT V1 H9 DO CV-11,SHORTEST=OFF,NO_RADIUS  UNITS=MM,$
GRAPH=OFF  TEXT=OFF  MULT=10.00  OUTPUT=BOTH
AX    NOMINAL       +TOL       -TOL       MEAS
M     13.32481    0.20000    0.20000   13.06623
    <--------
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement