Extract sample points

Is it possible to extract the sample points taken on a diameter (Auto CIR or Auto CYL)? I have to measure the surfaces around some holes on an assembly and the hole locations and would just add more sample points than the standard (3) instead of measuring the diameter and measure a plane.

Parents

Josh Carpenter over 8 years ago

Here is the Features to Points edited to create Vector and Generic Points from Auto Circle and Cylinder Sample Hits.

'===========================================================================
' To Points
'
' Extracts hits from features And creates vectorpoints With
' the hits THEO's.
'
' The names are created from the source feature Name And a number that
' represents the hit index.
'
' Idea taken from 'to_points.exe' from the Wilcox Script Repository
' which sadly doesn't work As expected.
'
' (c) vpt.se 2010-06-15
' Updated davehocum 20150311
' 20150406 Added To Vector Sample Points, To Generic Sample Points, To Read Point And AndersI Live Gen. Points.
' Added Palor Check Box. Polar will remove the .HIT[ ] from the NOM And MEAS For the Live Gen. Points. 
' Not all Auto Feature will work With the To Vector Sample Points And To Generic Sample Points.
'===========================================================================
Sub Main()
Dim PCDApp, PCDPartPrograms, PCDPartProgram, PCDCommands, PCDCommand
Dim PCDFeatCmd
Dim prbhit
Dim numhits As Integer
Set PCDApp = CreateObject("PCDLRN.Application")
Set PCDPartPrograms = PCDApp.PartPrograms
Set PCDPartProgram = PCDApp.ActivePartProgram
Set PCDCommands = PCDPartProgram.Commands
Dim cmd As Object
Dim Fcntr As Integer
Dim FeatureList$(9999)
Dim hX As Double, hY As Double, hZ As Double, hI As Double, hJ As Double, hK As Double
Dim tX, tY, tZ, mX, mY, mZ As String
 
'***** Predialog START
Fcntr = 0
' Enumerate commands
For Each cmd In PCDCommands
'----- Measured (learned) feature
 'If cmd.IsMeasuredFeature Then 
    'FeatureList(Fcntr) = cmd.ID
    'Fcntr = Fcntr + 1
  'End If
'----- Autofeature (flagged As DCC feature)
 'If cmd.IsDCCFeature Then
    'FeatureList(Fcntr) = cmd.ID
    'Fcntr = Fcntr + 1
  'End If
'----- Constructed feature
'If cmd.IsConstructedFeature Then
    'FeatureList(Fcntr) = cmd.ID
    'Fcntr = Fcntr + 1
  'End If
'----- All Features
If cmd.IsFeature Then
    FeatureList(Fcntr) = cmd.ID
    Fcntr = Fcntr + 1
 End If
 
Next cmd
'*****
'***** Dialog START
Begin Dialog DIALOG_1 31,48, 245, 280, "Feature to Points v2.0"
ListBox 88,8,150,250, FeatureList$(), .ListBox
  PushButton 8,72,62,12, "To Vector S Pnts", .VsPointsBtn 
  PushButton 8,93,62,12, "To Generic S Pnts", .GsPointsBtn 
  PushButton 8,255,52,12, "Cancel", .CancelBtn
End Dialog
Dim Dlg1 As DIALOG_1
button = Dialog(Dlg1)
' button 0 = Cancel, button 1 = To Vector points, button 2 = To Cast Points, button 3 = To Generic Points, 
' button 4 = To Vector S Pnts, button 5 = To Generic S Pnts, button 6 = To Read Point, button 7 = Live Gen. Points, button 8 = Random Error, 
'*****
'***** Vector Point Generation Sample Hits
Fcntr = 0
If button = 1 Then
  Set PCDCommand = PCDCommands.Item(FeatureList(Dlg1.Listbox)) 
  Set PCDFeatCmd = PCDCommand.FeatureCommand
  numhits = PCDFeatCmd.PermHits
  Set prbhit = CreateObject("PCDLRN.PointData")
For Fcntr = 1 To numhits
  ' Get the probehits - XYZ  
  Set prbhit = PCDFeatCmd.GetSampleHit(Fcntr, FHITDATA_CENTROID, FDATA_THEO, FDATA_PART, AlignID, PLANE_TOP)
  vX = CDbl(prbhit.X)
  vY = CDbl(prbhit.Y)
  vZ = CDbl(prbhit.Z)
  ' Get the probehits - IJK
  Set prbhit = PCDFeatCmd.GetSampleHit(Fcntr, FHITDATA_VECTOR, FDATA_THEO, FDATA_PART, AlignID, PLANE_TOP)
  vI = CDbl(prbhit.X)
  vJ = CDbl(prbhit.Y)
  vK = CDbl(prbhit.Z)
' Create Vector points feature "AUTO__VECTOR_HIT" (COMMAND INFORMATION CODE edit screen) 602
' Create Cast points feature "CONST__CAST_POINT" (COMMAND INFORMATION CODE edit screen) 517
' Create Generic points feature "GENERIC_CONSTUCTION" (COMMAND INFORMATION CODE edit screen) 597
' Create Constructed Feature Set "CONST__SET" (COMMAND INFORMATION CODE edit screen) 596 
  Set cmd = PCDCommands.Add(602, True)
  cmd.Marked = True
  'Featurename is "sourcefeaturename-hitnumber" -> PLANE1-1
  retval = cmd.PutText (PCDCommand.ID & "_S" & Fcntr, ID, 0)
  'Result = cmd.SetExpression (PCDCommand.ID & "." & "HIT" & "[" & Fcntr & "]" , REF_ID, 0)
  ' Theo's
  retval = cmd.PutText (vX, THEO_X, 0)
  retval = cmd.PutText (vY, THEO_Y, 0)
  retval = cmd.PutText (vZ, THEO_Z, 0)
  retval = cmd.PutText (vI, THEO_I, 0)
  retval = cmd.PutText (vJ, THEO_J, 0)
  retval = cmd.PutText (vK, THEO_K, 0)
  ' Actl's
  retval = cmd.PutText (vX, MEAS_X, 0)
  retval = cmd.PutText (vY, MEAS_Y, 0)
  retval = cmd.PutText (vZ, MEAS_Z, 0)
  retval = cmd.PutText (vI, MEAS_I, 0)
  retval = cmd.PutText (vJ, MEAS_J, 0)
  retval = cmd.PutText (vK, MEAS_K, 0)
  ' Targ's
  retval = cmd.PutText (vX, TARG_X, 0)
  retval = cmd.PutText (vY, TARG_Y, 0)
  retval = cmd.PutText (vZ, TARG_Z, 0)
  retval = cmd.PutText (vI, TARG_I, 0)
  retval = cmd.PutText (vJ, TARG_J, 0)
  retval = cmd.PutText (vK, TARG_K, 0)
  PCDPartProgram.RefreshPart
  cmd.ReDraw
  
Next
MsgBox "Vector Point Generation Sample Hits Complete"
End If
'***** Generic Point Generation Sample Hits
Fcntr = 0
If button = 2 Then
  Set PCDCommand = PCDCommands.Item(FeatureList(Dlg1.Listbox)) 
  Set PCDFeatCmd = PCDCommand.FeatureCommand
  numhits = PCDFeatCmd.PermHits
  Set prbhit = CreateObject("PCDLRN.PointData")
For Fcntr = 1 To numhits
  ' Get the probehits - XYZ  
  Set prbhit = PCDFeatCmd.GetSampleHit(Fcntr, FHITDATA_CENTROID, FDATA_THEO, FDATA_PART, AlignID, PLANE_TOP)
  gX = CDbl(prbhit.X)
  gY = CDbl(prbhit.Y)
  gZ = CDbl(prbhit.Z)
  ' Get the probehits - IJK
  Set prbhit = PCDFeatCmd.GetSampleHit(Fcntr, FHITDATA_VECTOR, FDATA_THEO, FDATA_PART, AlignID, PLANE_TOP)
  gI = CDbl(prbhit.X)
  gJ = CDbl(prbhit.Y)
  gK = CDbl(prbhit.Z)
' Create Vector points feature "AUTO__VECTOR_HIT" (COMMAND INFORMATION CODE edit screen) 602
' Create Cast points feature "CONST__CAST_POINT" (COMMAND INFORMATION CODE edit screen) 517
' Create Generic points feature "GENERIC_CONSTUCTION" (COMMAND INFORMATION CODE edit screen) 597
' Create Constructed Feature Set "CONST__SET" (COMMAND INFORMATION CODE edit screen) 596 
  Set cmd = PCDCommands.Add(597, True)
  cmd.Marked = True
  'Featurename is "sourcefeaturename-hitnumber" -> PLANE1-1
  retval = cmd.PutText (PCDCommand.ID & "_SG" & Fcntr, ID, 0)
  'Result = cmd.SetExpression (PCDCommand.ID & "." & "HIT" & "[" & Fcntr & "]" , REF_ID, 0)
  ' Theo's
  retval = cmd.PutText (gX, THEO_X, 0)
  retval = cmd.PutText (gY, THEO_Y, 0)
  retval = cmd.PutText (gZ, THEO_Z, 0)
  retval = cmd.PutText (gI, THEO_I, 0)
  retval = cmd.PutText (gJ, THEO_J, 0)
  retval = cmd.PutText (gK, THEO_K, 0)
  ' Actl's
  retval = cmd.PutText (gX, MEAS_X, 0)
  retval = cmd.PutText (gY, MEAS_Y, 0)
  retval = cmd.PutText (gZ, MEAS_Z, 0)
  retval = cmd.PutText (gI, MEAS_I, 0)
  retval = cmd.PutText (gJ, MEAS_J, 0)
  retval = cmd.PutText (gK, MEAS_K, 0)
  ' Targ's
  retval = cmd.PutText (gX, TARG_X, 0)
  retval = cmd.PutText (gY, TARG_Y, 0)
  retval = cmd.PutText (gZ, TARG_Z, 0)
  retval = cmd.PutText (gI, TARG_I, 0)
  retval = cmd.PutText (gJ, TARG_J, 0)
  retval = cmd.PutText (gK, TARG_K, 0)
  PCDPartProgram.RefreshPart
  cmd.ReDraw
  
Next
MsgBox "Generic Point Generation Sample Hits Complete"
End If
'*****
'*****
'***** Cleanup
Set PCDApp = Nothing
Set PCDPartPrograms = Nothing
Set PCDPartProgram = Nothing
Set PCDCommands = Nothing
Set prbhit = Nothing
'*****
End Sub

Copy, open Notepad, paste, Save As...

... will play with this eventually.

Reply

Josh Carpenter over 8 years ago

Here is the Features to Points edited to create Vector and Generic Points from Auto Circle and Cylinder Sample Hits.

'===========================================================================
' To Points
'
' Extracts hits from features And creates vectorpoints With
' the hits THEO's.
'
' The names are created from the source feature Name And a number that
' represents the hit index.
'
' Idea taken from 'to_points.exe' from the Wilcox Script Repository
' which sadly doesn't work As expected.
'
' (c) vpt.se 2010-06-15
' Updated davehocum 20150311
' 20150406 Added To Vector Sample Points, To Generic Sample Points, To Read Point And AndersI Live Gen. Points.
' Added Palor Check Box. Polar will remove the .HIT[ ] from the NOM And MEAS For the Live Gen. Points. 
' Not all Auto Feature will work With the To Vector Sample Points And To Generic Sample Points.
'===========================================================================
Sub Main()
Dim PCDApp, PCDPartPrograms, PCDPartProgram, PCDCommands, PCDCommand
Dim PCDFeatCmd
Dim prbhit
Dim numhits As Integer
Set PCDApp = CreateObject("PCDLRN.Application")
Set PCDPartPrograms = PCDApp.PartPrograms
Set PCDPartProgram = PCDApp.ActivePartProgram
Set PCDCommands = PCDPartProgram.Commands
Dim cmd As Object
Dim Fcntr As Integer
Dim FeatureList$(9999)
Dim hX As Double, hY As Double, hZ As Double, hI As Double, hJ As Double, hK As Double
Dim tX, tY, tZ, mX, mY, mZ As String
 
'***** Predialog START
Fcntr = 0
' Enumerate commands
For Each cmd In PCDCommands
'----- Measured (learned) feature
 'If cmd.IsMeasuredFeature Then 
    'FeatureList(Fcntr) = cmd.ID
    'Fcntr = Fcntr + 1
  'End If
'----- Autofeature (flagged As DCC feature)
 'If cmd.IsDCCFeature Then
    'FeatureList(Fcntr) = cmd.ID
    'Fcntr = Fcntr + 1
  'End If
'----- Constructed feature
'If cmd.IsConstructedFeature Then
    'FeatureList(Fcntr) = cmd.ID
    'Fcntr = Fcntr + 1
  'End If
'----- All Features
If cmd.IsFeature Then
    FeatureList(Fcntr) = cmd.ID
    Fcntr = Fcntr + 1
 End If
 
Next cmd
'*****
'***** Dialog START
Begin Dialog DIALOG_1 31,48, 245, 280, "Feature to Points v2.0"
ListBox 88,8,150,250, FeatureList$(), .ListBox
  PushButton 8,72,62,12, "To Vector S Pnts", .VsPointsBtn 
  PushButton 8,93,62,12, "To Generic S Pnts", .GsPointsBtn 
  PushButton 8,255,52,12, "Cancel", .CancelBtn
End Dialog
Dim Dlg1 As DIALOG_1
button = Dialog(Dlg1)
' button 0 = Cancel, button 1 = To Vector points, button 2 = To Cast Points, button 3 = To Generic Points, 
' button 4 = To Vector S Pnts, button 5 = To Generic S Pnts, button 6 = To Read Point, button 7 = Live Gen. Points, button 8 = Random Error, 
'*****
'***** Vector Point Generation Sample Hits
Fcntr = 0
If button = 1 Then
  Set PCDCommand = PCDCommands.Item(FeatureList(Dlg1.Listbox)) 
  Set PCDFeatCmd = PCDCommand.FeatureCommand
  numhits = PCDFeatCmd.PermHits
  Set prbhit = CreateObject("PCDLRN.PointData")
For Fcntr = 1 To numhits
  ' Get the probehits - XYZ  
  Set prbhit = PCDFeatCmd.GetSampleHit(Fcntr, FHITDATA_CENTROID, FDATA_THEO, FDATA_PART, AlignID, PLANE_TOP)
  vX = CDbl(prbhit.X)
  vY = CDbl(prbhit.Y)
  vZ = CDbl(prbhit.Z)
  ' Get the probehits - IJK
  Set prbhit = PCDFeatCmd.GetSampleHit(Fcntr, FHITDATA_VECTOR, FDATA_THEO, FDATA_PART, AlignID, PLANE_TOP)
  vI = CDbl(prbhit.X)
  vJ = CDbl(prbhit.Y)
  vK = CDbl(prbhit.Z)
' Create Vector points feature "AUTO__VECTOR_HIT" (COMMAND INFORMATION CODE edit screen) 602
' Create Cast points feature "CONST__CAST_POINT" (COMMAND INFORMATION CODE edit screen) 517
' Create Generic points feature "GENERIC_CONSTUCTION" (COMMAND INFORMATION CODE edit screen) 597
' Create Constructed Feature Set "CONST__SET" (COMMAND INFORMATION CODE edit screen) 596 
  Set cmd = PCDCommands.Add(602, True)
  cmd.Marked = True
  'Featurename is "sourcefeaturename-hitnumber" -> PLANE1-1
  retval = cmd.PutText (PCDCommand.ID & "_S" & Fcntr, ID, 0)
  'Result = cmd.SetExpression (PCDCommand.ID & "." & "HIT" & "[" & Fcntr & "]" , REF_ID, 0)
  ' Theo's
  retval = cmd.PutText (vX, THEO_X, 0)
  retval = cmd.PutText (vY, THEO_Y, 0)
  retval = cmd.PutText (vZ, THEO_Z, 0)
  retval = cmd.PutText (vI, THEO_I, 0)
  retval = cmd.PutText (vJ, THEO_J, 0)
  retval = cmd.PutText (vK, THEO_K, 0)
  ' Actl's
  retval = cmd.PutText (vX, MEAS_X, 0)
  retval = cmd.PutText (vY, MEAS_Y, 0)
  retval = cmd.PutText (vZ, MEAS_Z, 0)
  retval = cmd.PutText (vI, MEAS_I, 0)
  retval = cmd.PutText (vJ, MEAS_J, 0)
  retval = cmd.PutText (vK, MEAS_K, 0)
  ' Targ's
  retval = cmd.PutText (vX, TARG_X, 0)
  retval = cmd.PutText (vY, TARG_Y, 0)
  retval = cmd.PutText (vZ, TARG_Z, 0)
  retval = cmd.PutText (vI, TARG_I, 0)
  retval = cmd.PutText (vJ, TARG_J, 0)
  retval = cmd.PutText (vK, TARG_K, 0)
  PCDPartProgram.RefreshPart
  cmd.ReDraw
  
Next
MsgBox "Vector Point Generation Sample Hits Complete"
End If
'***** Generic Point Generation Sample Hits
Fcntr = 0
If button = 2 Then
  Set PCDCommand = PCDCommands.Item(FeatureList(Dlg1.Listbox)) 
  Set PCDFeatCmd = PCDCommand.FeatureCommand
  numhits = PCDFeatCmd.PermHits
  Set prbhit = CreateObject("PCDLRN.PointData")
For Fcntr = 1 To numhits
  ' Get the probehits - XYZ  
  Set prbhit = PCDFeatCmd.GetSampleHit(Fcntr, FHITDATA_CENTROID, FDATA_THEO, FDATA_PART, AlignID, PLANE_TOP)
  gX = CDbl(prbhit.X)
  gY = CDbl(prbhit.Y)
  gZ = CDbl(prbhit.Z)
  ' Get the probehits - IJK
  Set prbhit = PCDFeatCmd.GetSampleHit(Fcntr, FHITDATA_VECTOR, FDATA_THEO, FDATA_PART, AlignID, PLANE_TOP)
  gI = CDbl(prbhit.X)
  gJ = CDbl(prbhit.Y)
  gK = CDbl(prbhit.Z)
' Create Vector points feature "AUTO__VECTOR_HIT" (COMMAND INFORMATION CODE edit screen) 602
' Create Cast points feature "CONST__CAST_POINT" (COMMAND INFORMATION CODE edit screen) 517
' Create Generic points feature "GENERIC_CONSTUCTION" (COMMAND INFORMATION CODE edit screen) 597
' Create Constructed Feature Set "CONST__SET" (COMMAND INFORMATION CODE edit screen) 596 
  Set cmd = PCDCommands.Add(597, True)
  cmd.Marked = True
  'Featurename is "sourcefeaturename-hitnumber" -> PLANE1-1
  retval = cmd.PutText (PCDCommand.ID & "_SG" & Fcntr, ID, 0)
  'Result = cmd.SetExpression (PCDCommand.ID & "." & "HIT" & "[" & Fcntr & "]" , REF_ID, 0)
  ' Theo's
  retval = cmd.PutText (gX, THEO_X, 0)
  retval = cmd.PutText (gY, THEO_Y, 0)
  retval = cmd.PutText (gZ, THEO_Z, 0)
  retval = cmd.PutText (gI, THEO_I, 0)
  retval = cmd.PutText (gJ, THEO_J, 0)
  retval = cmd.PutText (gK, THEO_K, 0)
  ' Actl's
  retval = cmd.PutText (gX, MEAS_X, 0)
  retval = cmd.PutText (gY, MEAS_Y, 0)
  retval = cmd.PutText (gZ, MEAS_Z, 0)
  retval = cmd.PutText (gI, MEAS_I, 0)
  retval = cmd.PutText (gJ, MEAS_J, 0)
  retval = cmd.PutText (gK, MEAS_K, 0)
  ' Targ's
  retval = cmd.PutText (gX, TARG_X, 0)
  retval = cmd.PutText (gY, TARG_Y, 0)
  retval = cmd.PutText (gZ, TARG_Z, 0)
  retval = cmd.PutText (gI, TARG_I, 0)
  retval = cmd.PutText (gJ, TARG_J, 0)
  retval = cmd.PutText (gK, TARG_K, 0)
  PCDPartProgram.RefreshPart
  cmd.ReDraw
  
Next
MsgBox "Generic Point Generation Sample Hits Complete"
End If
'*****
'*****
'***** Cleanup
Set PCDApp = Nothing
Set PCDPartPrograms = Nothing
Set PCDPartProgram = Nothing
Set PCDCommands = Nothing
Set prbhit = Nothing
'*****
End Sub

Copy, open Notepad, paste, Save As...

... will play with this eventually.

Children

No Data