Hi all! I've got a program that loops to measure four parts on one run. The program loops properly and gives me four separate reports except after the first run our company header is not carried on past the first report. What am i missing? I know I am missing something simple, but I have been beating my head against the wall trying to figure it out. I have chosen the proper template and chose the right default report to use, but to no avail. BTW, I am running 2013 MR1 SP6. Thanks in advance.
I added a counter in loop that prints part number then adds +1 to that at end of loop
ASSIGN/PARTSER_NUM=C4.INPUT
LOOP/START
COMMENT/REPT,
" ORDER NUMBER :"+C5.INPUT+" Serial Number : "+PARTSER_NUM+" Operator :"+C3.INPUT+ " WORK CENTER : "+ C6.INPUT
*****code******
PRINT COMMAND
ASSIGN/PARTSER_NUM=PARTSER_NUM+1
loop/end
I added a counter in loop that prints part number then adds +1 to that at end of loop
ASSIGN/PARTSER_NUM=C4.INPUT
LOOP/START
COMMENT/REPT,
" ORDER NUMBER :"+C5.INPUT+" Serial Number : "+PARTSER_NUM+" Operator :"+C3.INPUT+ " WORK CENTER : "+ C6.INPUT
*****code******
PRINT COMMAND
ASSIGN/PARTSER_NUM=PARTSER_NUM+1
loop/end
