Alternative way on Report

Guys,

I've just started to use PC-DMIS for CMMs, weeks ago.
I need help on the reporting format, especially on the parts that require many measurements.
As I'll be measuring all dimensions, based on drawing.
Reporting with PC-DMIS can be tedious as there are many dimensions, what is the best way to generate a report, for instance, part as such.

Parents

Schrocknroll over 8 years ago

Just tried "Auto dimensioning"
but somehow the features doesn't generate dimension based on the origin instead it generate something like: {"data-align":"none","data-size":"large","data-attachmentid":396106}

With the Auto Location/Position box ticked and the Create Location dimensions radio button on, it should dimension the locations with the tolerance you select.

If you are using Vector points, it should dimension the X, Y, Z, & T(profile along vector). If you are using measured points, it will dimension the primary axis of the point. Circles should dimension the primary axes of the circle and the diameter.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

Schrocknroll over 8 years ago

Just tried "Auto dimensioning"
but somehow the features doesn't generate dimension based on the origin instead it generate something like: {"data-align":"none","data-size":"large","data-attachmentid":396106}

With the Auto Location/Position box ticked and the Create Location dimensions radio button on, it should dimension the locations with the tolerance you select.

If you are using Vector points, it should dimension the X, Y, Z, & T(profile along vector). If you are using measured points, it will dimension the primary axis of the point. Circles should dimension the primary axes of the circle and the diameter.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data