I have read a number of posts regarding probe calibration and using a Master probe to relate multiple probes. I have a few questions that I did not find the answers in the posts.
Question #1 - If you are using the Master probe for measurement does it affect the relationship of the other probes if you re-calibrate A0/B0 of the Master Probe after answering "N0" to the calibration sphere move. For example - Start of shift the Master probe is calibrated at A0 / B0 and you answer "Yes" the tooling sphere has moved. Now you open a program that uses the master probe for measurement. You want to perform a calibration on the angles that are used in the program. Perform a Marked Used which includes A0/B0. You answer "No" the tool has not moved and perform calibration. Is the relationship of the other probes and angles lost???
Question #2 - Is it necessary to calibrate Master Probe every time the machine is homed??
Just went to my 1st file of Rack 1 Tool 1 that I use as the common tool (master) x 4 different sphere angles to calibrate the all my sets and the Theo's are a all 0's but the Meas's is not. Does this look correct
Just went to my 1st file of Rack 1 Tool 1 that I use as the common tool (master) x 4 different sphere angles to calibrate the all my sets and the Theo's are a all 0's but the Meas's is not. Does this look correct