Your Products have been synced, click here to refresh
-------------
When I dimension the angle, it is the opposite of what I'm looking for (90-rule). If its a 22.70°, I'll get a dimension of 67.30° How would I reverse this?
I have tried to change the workplane and direction of the line itself, but then it just changes if its -22.70 or +22.70 away from 90°.
I have tried to construct a generic feature and flip the two vectors, which works, but is tedious and bloats the program. Could I assign variables or something so that it measures the line the same way (or a right way, or what have you) but flips the J,K vectors for the dimension? Or simply report the angle, but subtract 90 every time programmatically, which I would prefer so the reports say 22.70 instead of 67.30.
=======================
DIM ANGLEDIM1= 2D ANGLE FROM LINE AJ-1 TO LINE LINE2 ,$ GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH AX NOMINAL +TOL -TOL MEAS DEV OUTTOL A 73.50000 0.00039 0.00039 73.11986 -0.38014 0.37975 <--- F1 =GENERIC/NONE,DEPENDENT,CARTESIAN,OUT,$ NOM/XYZ,<0+0,0+0,0+0>,$ MEAS/XYZ,<0+0,0+0,0+0>,$ NOM/IJK,<0+0,0+0,1>,$ MEAS/IJK,<0+0,0+0,1>,$ RADIUS/0+0,0+0,$ ANGLE/ANGLEDIM1.NOM+(-90),ANGLEDIM1.MEAS+(-90),$ DISTANCE/1,1 DIM AJ5= LOCATION OF PLANE F1 UNITS=IN ,$ GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO AX NOMINAL +TOL -TOL MEAS DEV OUTTOL A 16.50000 0.00039 0.00039 -16.88014 -33.38014 33.37975 <--- END OF DIMENSION AJ5]
-------------
When I dimension the angle, it is the opposite of what I'm looking for (90-rule). If its a 22.70°, I'll get a dimension of 67.30° How would I reverse this?
I have tried to change the workplane and direction of the line itself, but then it just changes if its -22.70 or +22.70 away from 90°.
I have tried to construct a generic feature and flip the two vectors, which works, but is tedious and bloats the program. Could I assign variables or something so that it measures the line the same way (or a right way, or what have you) but flips the J,K vectors for the dimension? Or simply report the angle, but subtract 90 every time programmatically, which I would prefer so the reports say 22.70 instead of 67.30.
=======================
DIM ANGLEDIM1= 2D ANGLE FROM LINE AJ-1 TO LINE LINE2 ,$ GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH AX NOMINAL +TOL -TOL MEAS DEV OUTTOL A 73.50000 0.00039 0.00039 73.11986 -0.38014 0.37975 <--- F1 =GENERIC/NONE,DEPENDENT,CARTESIAN,OUT,$ NOM/XYZ,<0+0,0+0,0+0>,$ MEAS/XYZ,<0+0,0+0,0+0>,$ NOM/IJK,<0+0,0+0,1>,$ MEAS/IJK,<0+0,0+0,1>,$ RADIUS/0+0,0+0,$ ANGLE/ANGLEDIM1.NOM+(-90),ANGLEDIM1.MEAS+(-90),$ DISTANCE/1,1 DIM AJ5= LOCATION OF PLANE F1 UNITS=IN ,$ GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO AX NOMINAL +TOL -TOL MEAS DEV OUTTOL A 16.50000 0.00039 0.00039 -16.88014 -33.38014 33.37975 <--- END OF DIMENSION AJ5]
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |