hexagon logo
Register Sign in
  • Replies 5 replies
  • Subscribers 221 subscribers
  • Views 324 views
  • Users 0 members are here
Options
Related

Delete datum information on True Position FCF

M.Awal
I Have trouble when showing True Position on FCF,
There is some information i want to hide or delete, that is location on Datum which shown in Position tab, that information come when i add secondary and tertiery datum with MMC or LMC on True Position,
Is there anyone know what is the purpose for that info, or can it deleted or hide, because i have been asked for that..

Parents
  • It's red because you have a tolerance of zero for its position. All it can use for sliding around is the diameter bonus, and as you can see, the bonus is smaller than the position deviation in the picture. If that is exactly what the drawing says, the red datum is important - it tells you that the holes, as a group, are too far away from the datum; The only way to get the group OK is to move the datum out of its tolerance zone, hence red. If the red datum is not important, the program (and possibly the drawing) is incomplete.

    You don't solve "I couldn't explain" by hiding it!
Reply
  • It's red because you have a tolerance of zero for its position. All it can use for sliding around is the diameter bonus, and as you can see, the bonus is smaller than the position deviation in the picture. If that is exactly what the drawing says, the red datum is important - it tells you that the holes, as a group, are too far away from the datum; The only way to get the group OK is to move the datum out of its tolerance zone, hence red. If the red datum is not important, the program (and possibly the drawing) is incomplete.

    You don't solve "I couldn't explain" by hiding it!
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement