How do I change tips in the middle of a Sphere Measurement? I can add move points but not a tip angle change.
I am measuring a sphere (split bearing) and the fixture needs to hold the top & bottom, so I am limited to using tips T1A90B0 & T1A90B180. I thought I would be able to Show Hits and insert the move points and tip change. Am I doing it wrong?
Here is a snippet of the code:
HIT/BASIC,<-0.7983,-0.1336,-0.1599>,<-0.9675873,-0.1618877,-0.1938227>,<-0.7983,-0.1336,-0.1599>
HIT/BASIC,<-0.7988,-0.1221,0.1665>,<-0.9681832,-0.1479705,0.2018071>,<-0.7988,-0.1221,0.1665>
MOVE/POINT,NORMAL<-1.25,0,0>
MOVE/POINT,NORMAL<-1.25,0,8>
MOVE/POINT,NORMAL<-1.25,0,8>
MOVE/POINT,NORMAL<-1.25,0,0>
HIT/BASIC,<-0.7925,0.1331,0.1868>,<-0.9605614,0.1613483,0.2264698>,<-0.7925,0.1331,0.1868>
HIT/BASIC,<-0.8036,0.1439,-0.1192>,<-0.9740275,0.1743678,-0.1444515>,<-0.8036,0.1439,-0.1192>
I would like to put the tip change in between the 2nd & 3rd move points
I tried measuring half at a time and then 'merging' them together with a constructed sphere but I get this error:
Math failed for SPH3: Combination of input features not supported.
Please help!
