Hello. This is more of a hardware issue I believe. The x,y, and z readings change in PCDMIS when I move the probe head around the machine, but the LED lights on the probe head are not on and it won't register a hit. Any troubleshooting ideas? Thanks!
Suppose you use the smart bulb instead of a regular one. In that case, the problem can disappear, but be careful and look at your laws first.
In the same countries, using the smart bulbs as part of car lighting is still restricted, so you can get some problems with road police if you use them without permission. It also needs to be mentioned to use them for the car, and you will need a good electricity system, so you will be unable to use them for most of the 2010 or older car models.
Suppose you use the smart bulb instead of a regular one. In that case, the problem can disappear, but be careful and look at your laws first.
In the same countries, using the smart bulbs as part of car lighting is still restricted, so you can get some problems with road police if you use them without permission. It also needs to be mentioned to use them for the car, and you will need a good electricity system, so you will be unable to use them for most of the 2010 or older car models.
