hexagon logo
Register Sign in
  • Replies 3 replies
  • Subscribers 222 subscribers
  • Views 89 views
  • Users 0 members are here
Options
Related

GD&T Report Font Issues

graysunlight
I recently ran into an issue when reviewing reports that shows the following for a true position measurement in a CAD view:



I did some digging on both of our CMM stations thinking that one of them may have an oddball setting or a corrupt font file but both stations exhibit this behavior when printing/saving reports to .pdf. However, the feature control frame is showing as it should in the body of the report, just not in the CAD view. I was wondering if anyone has encountered this issue and knew of a fix for it.

Thanks in advance for any help or suggestions.
Parents
  • Might be the pdf is created in too high resolution, needing too much RAM, so something must give.

    Check MaxPrintResolution and MaxTextPrintResolution in Settings Editor - really no need to go above 600 DPI (dots per inch) there (screens are around 100).

    It might also be a problem of access rights - have you tested starting PC-DMIS with right click + Run as Admin, is the behaviour the same?
Reply
  • Might be the pdf is created in too high resolution, needing too much RAM, so something must give.

    Check MaxPrintResolution and MaxTextPrintResolution in Settings Editor - really no need to go above 600 DPI (dots per inch) there (screens are around 100).

    It might also be a problem of access rights - have you tested starting PC-DMIS with right click + Run as Admin, is the behaviour the same?
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement