hexagon logo
Register Sign in
  • Replies 11 replies
  • Subscribers 225 subscribers
  • Views 309 views
  • Users 0 members are here
Options
Related

how to increase speed?

ewadora
Hi All
I use PC-DMIS CAD++ 2019 R1 on B&S 5.7.5, its absolute speed is 700 (this is what I see when I open F5 ). Most of our programs run with speed 200-300mm/s. I changed it to 500 in program edit window but didn't see any difference.
I searched forum and found information that I can change speed in machine interface setup, so I did, under "Params" tab I changed x,y,z max speed to 500. But I couldn't run any program. Right after I start it gives me execution error "move absolute to...." no even error#. Is this speed limited somewhere else?
Please help
Thanks,
Ewa
Parents
  • additionally, within each routine, you can define MOVESPEED and TOUCHSPEED, which are values also relative to that "use ABSOLUTE speeds" checkbox (100=max value if you are using %of max).

    Touchspeed is a whole different monster, do not change your touchspeed unless you know what you are doing, or are assessing/learning what affect it has on your equipment and measurement accuracy. You should calibrate all your probes at the same touchspeed as you are using to measure the product. Some people have done studies and found that for their application a touchpseed of 6mm/sec is safe and fastest for TP200's, but it is completely dependent upon your sensor, and the accuracy you expect to receive from said sensor. Default with PCDMIS is 2mm/sec.
Reply
  • additionally, within each routine, you can define MOVESPEED and TOUCHSPEED, which are values also relative to that "use ABSOLUTE speeds" checkbox (100=max value if you are using %of max).

    Touchspeed is a whole different monster, do not change your touchspeed unless you know what you are doing, or are assessing/learning what affect it has on your equipment and measurement accuracy. You should calibrate all your probes at the same touchspeed as you are using to measure the product. Some people have done studies and found that for their application a touchpseed of 6mm/sec is safe and fastest for TP200's, but it is completely dependent upon your sensor, and the accuracy you expect to receive from said sensor. Default with PCDMIS is 2mm/sec.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement