Hi All,
We're currently making (and measuring) a very complex part that, among other things, has 10 fin-like projections that other parts fasten to. I would post a screenshot, but sadly it's ITAR. These fins have a .001"/1x1 flatness tolerance that's pretty tricky to hold, so I'm analog scanning each fin fairly thoroughly. Occasionally something in the manufacturing process gets the teeniest bit out of whack, and then the flatness goes out of spec. I have the CAD graphics for the flatnesses turned on so the guys can see where the issues are; however, they can only see that if they look at the open program right after the part is run.
I know it's possible to insert screenshots from the CAD window into the report; however, is it possible to have multiple screenshots with different section views and features turned on? The nature of the fins is such that it's not easy to see what's what without either the ability to rotate the part or show sections with only one CAD graph turned on at a time.
