here :
https://www.wilcoxassoc.com/public/P...20_R1/SP3/x64/
ftp://ftp.wilcoxassoc.com/PC-DMIS-Ve...20_R1/SP3/x64/
Release Notes - 2020 R1
SP3
• PCD-47924 - Fixed an issue where PC-DMIS didn't execute the Go 6DoF
command when you pressed Alt + F9 for the AT960 and AT901 trackers.
• PCD-123716 - Fixed an issue where the IMAGECAPTURE command added a
blank feature label when you had generated the report.
• PCD-155565 - Fixed an issue where Laser scanning performance was
affected with blue and purple points when you re-executed a measurement
routine.
• PCD-164073 - Fixed an issue where the offline Help didn't work even when
the offline help was installed and the Use Offline Help option was selected.
• PCD-171401 - Fixed an issue where a laser pointer was not activated when
you had done the machine configuration.
• PCD-177404 - Fixed an issue where the Probe Toolbox dialog box appeared
when the Feature Extraction tab was active and you clicked Cancel in the
Laser Auto Feature dialog box.
• PCD-183366 - Fixed an issue where PC-DMIS didn't change the file type for
the COP ID in the Edit window when you changed the file type from the Type
list in the Pointcloud Operator dialog box.
• PCD-185964 - Fixed an issue where some scan data were not imported
properly when you used the Simulate Pointcloud function.
• PCD-186792 - Fixed an issue where a distortion calibration file was not
created when a vision probe with multiple tips was calibrated for Pixel Size
and Distortion.
• PCD-186848 - Fixed an issue where pre-defined Pointcloud Display | Mesh
display profiles were visible in the Laser Data Collection Settings dialog
box for DCC CMMs.
• PCD-186957 - Fixed an issue where PC-DMIS didn't generate a unique probe
name for each orientation when you worked on UCCServer.
• PCD-187251 - Fixed an issue where a measurement routine was not created
or opened when you used a portable SCANMESH license with the AICON -
Offline interface.
• PCD-187589 - Fixed a software crash that occurred when you imported a
pointcloud file that didn't have stripe information and created the Grid mesh.
• PCD-187655 - Fixed an issue where PC-DMIS didn't display the Pointcloud
select area when you edited the Select command from the Pointcloud
Operator dialog box.
• PCD-188327 - Fixed an issue where PC-DMIS reported incorrect values of
D1, D2, and D3 when you had generated the statistics.xml file.
• PCD-188784 - Fixed an issue with the I++ interface where automatic tool
changes took place when you moved your cursor position in the measurement
routine.
• PCD-189225 - Fixed an issue where PC-DMIS didn't create multiple Mesh
Thickness colormaps when you executed a measurement routine.
• PCD-190223 - Fixed an issue where the Pointcloud or Mesh shading was lost
and became flat when the COP or Mesh was picked from the Pointcloud
Operator or Mesh Operator dialog box.
• PCD-191253 - Fixed an issue where PC-DMIS failed to extract BH Laser
features when the pointcloud was far away from the CAD model.
• PCD-191781 - Fixed a software crash that occurred when you opened your
measurement routine in modes other than the Operator Mode.
• PCD-192474 - Fixed an issue where the laser auto features were not
automatically executed when data was received from a TCP/IP transfer, such
as the AICON OptoCat software.
