I am trying to take a measurement from the apex of a constructed 100 degree cone tangent to a measured sphere. I'll attach an image to give an idea of what I'm tryin g to do. Can this be done in PC-DMIS?
measure a conical feature and a plane, you can offset plane to intersect cone and evaluate diameter at that location. do this on a conical feature that defines the size at a gage point to define size at a specified location.
measure a conical feature and a plane, you can offset plane to intersect cone and evaluate diameter at that location. do this on a conical feature that defines the size at a gage point to define size at a specified location.
