hexagon logo
Register Sign in
  • Replies 29 replies
  • Subscribers 221 subscribers
  • Views 630 views
  • Users 0 members are here
Options
Related

Legacy TP - NoOK, Xact TP - OK

Vladimir
Recently we had a dispute, for many years we measured a part according to the program sent to us by our collegues from another country, I am forbidden to doubt their qualifications. They used an legacy method for measuring TP, everything was in order until we started having problems with the cnc producing this part, some holes went out of tolerance, for the sake of interest I tried to apply xact and for these measurements it is not ideal but in the tolerance zone, now we do not know what to do, because our parts do not pass through the old dimensions, but the repair service says that it cannot find the problem, I am still a beginner and do not want to go against great minds, but I just wonder how it would be more correct. Here measurements of the same part, and we use iterative alignment.
Have a great sunny weekend everyone Slight smile
​​​​​​​
Parents
  • yes, here is the code from the program provided for us
    Part 1 
    PNT1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<-13.239,32.138,10.2>,<0,0,1>
ACTL/<121.514,277.054,-720.653>,<0.0000705,-0.0006548,0.9999998>
TARG/<-13.239,32.138,10.2>,<0,0,1>
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=BOTH,DISTANCE=20
SHOW HITS=NO
PNT2 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<-21.993,-25.32,10.2>,<0,0,1>
ACTL/<121.121,218.934,-720.688>,<0.0000705,-0.0006548,0.9999998>
TARG/<-21.993,-25.32,10.2>,<0,0,1>
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=BOTH,DISTANCE=20
SHOW HITS=NO
PNT3 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<32.524,-3.431,10.2>,<0,0,1>
ACTL/<171.92,248.445,-720.676>,<0.0000705,-0.0006548,0.9999998>
TARG/<32.524,-3.431,10.2>,<0,0,1>
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=BOTH,DISTANCE=20
SHOW HITS=NO
PNT4 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<18.15,27.13,10.2>,<0,0,1>
ACTL/<153.297,276.618,-720.65>,<0.0000705,-0.0006548,0.9999998>
TARG/<18.15,27.13,10.2>,<0,0,1>
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=BOTH,DISTANCE=20
SHOW HITS=NO
B CIR =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,10.2>,<0,0,1>,45
ACTL/<139.235,247.162,-720.657>,<0.0002473,-0.0008993,0.9999996>,45.032
TARG/<0,0,10.2>,<0,0,1>
START ANG=0,END ANG=0
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=4,DEPTH=3,PITCH=0
SAMPLE HITS=3,SPACER=3
AVOIDANCE MOVE=BOTH,DISTANCE=20
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
C CIR =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<-4.307,-32.724,10.2>,<0,0,1>,11.5
ACTL/<139.704,214.105,-720.693>,<0.000345,-0.0023923,0.9999971>,11.548
TARG/<-4.307,-32.718,10.2>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=4,DEPTH=3,PITCH=0
SAMPLE HITS=3,SPACER=3
AVOIDANCE MOVE=BOTH,DISTANCE=20
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/ITERATE
PNT TARGET RAD=0.1,START LABEL=,FIXTURE TOL=0.05,ERROR LABEL=
MEAS ALL FEAT=ALWAYS,MAX ITERATIONS=1,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
LEVEL=PNT1,PNT2,PNT3,PNT4,,
ROTATE=B CIR,C CIR,,
ORIGIN=B CIR,,
ALIGNMENT/END
MODE/DCC
CLEARP/ZPLUS,35,ZPLUS,35,ON
PNT5 =FEAT/POINT,CARTESIAN
THEO/<5.216,32.796,0.118>,<0,0,1>
ACTL/<5.217,32.796,-0.659>,<0,0,1>
MEAS/POINT,1,WORKPLANE
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<5.216,32.796,0.118>,<0,0,1>,<5.217,3 2.796,-0.659>,USE THEO=YES
ENDMEAS/
PNT6 =FEAT/POINT,CARTESIAN
THEO/<-27.029,20.012,0.111>,<0,0,1>
ACTL/<-27.029,20.012,-0.652>,<0,0,1>
MEAS/POINT,1,WORKPLANE
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<-27.029,20.012,0.111>,<0,0,1>,<-27.029,20.012,-0.652>,USE THEO=YES
ENDMEAS/
PNT7 =FEAT/POINT,CARTESIAN
THEO/<-5.7,-34.325,0.074>,<0,0,1>
ACTL/<-5.7,-34.328,-0.609>,<0,0,1>
MEAS/POINT,1,WORKPLANE
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<-5.7,-34.325,0.074>,<0,0,1>,<-5.7,-34.328,-0.609>,USE THEO=YES
ENDMEAS/
PNT8 =FEAT/POINT,CARTESIAN
THEO/<29.959,11.994,0.102>,<0,0,1>
ACTL/<29.96,11.995,-0.627>,<0,0,1>
MEAS/POINT,1,WORKPLANE
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<29.959,11.994,0.102>,<0,0,1>,<29.96, 11.995,-0.627>,USE THEO=YES
ENDMEAS/
A PLN =FEAT/PLANE,CARTESIAN,TRIANGLE,NO
THEO/<0.611,7.62,0.101>,<0.0000598,-0.0006592,0.9999998>
ACTL/<0.612,7.618,-0.637>,<-0.0003234,0.0007474,0.9999997>
CONSTR/PLANE,BFRE,PNT5,PNT6,PNT7,PNT8,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
MOVE/CLEARPLANE
A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/LEVEL,ZPLUS,A PLN
ALIGNMENT/TRANS,ZAXIS,A PLN
ALIGNMENT/END
Reply
  • yes, here is the code from the program provided for us
    Part 1 
    PNT1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<-13.239,32.138,10.2>,<0,0,1>
ACTL/<121.514,277.054,-720.653>,<0.0000705,-0.0006548,0.9999998>
TARG/<-13.239,32.138,10.2>,<0,0,1>
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=BOTH,DISTANCE=20
SHOW HITS=NO
PNT2 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<-21.993,-25.32,10.2>,<0,0,1>
ACTL/<121.121,218.934,-720.688>,<0.0000705,-0.0006548,0.9999998>
TARG/<-21.993,-25.32,10.2>,<0,0,1>
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=BOTH,DISTANCE=20
SHOW HITS=NO
PNT3 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<32.524,-3.431,10.2>,<0,0,1>
ACTL/<171.92,248.445,-720.676>,<0.0000705,-0.0006548,0.9999998>
TARG/<32.524,-3.431,10.2>,<0,0,1>
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=BOTH,DISTANCE=20
SHOW HITS=NO
PNT4 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<18.15,27.13,10.2>,<0,0,1>
ACTL/<153.297,276.618,-720.65>,<0.0000705,-0.0006548,0.9999998>
TARG/<18.15,27.13,10.2>,<0,0,1>
SHOW FEATURE PARAMETERS=YES
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
AVOIDANCE MOVE=BOTH,DISTANCE=20
SHOW HITS=NO
B CIR =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,10.2>,<0,0,1>,45
ACTL/<139.235,247.162,-720.657>,<0.0002473,-0.0008993,0.9999996>,45.032
TARG/<0,0,10.2>,<0,0,1>
START ANG=0,END ANG=0
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=4,DEPTH=3,PITCH=0
SAMPLE HITS=3,SPACER=3
AVOIDANCE MOVE=BOTH,DISTANCE=20
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
C CIR =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<-4.307,-32.724,10.2>,<0,0,1>,11.5
ACTL/<139.704,214.105,-720.693>,<0.000345,-0.0023923,0.9999971>,11.548
TARG/<-4.307,-32.718,10.2>,<0,0,1>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=YES
REMEASURE=NO
SURFACE=THEO_THICKNESS,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=4,DEPTH=3,PITCH=0
SAMPLE HITS=3,SPACER=3
AVOIDANCE MOVE=BOTH,DISTANCE=20
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/ITERATE
PNT TARGET RAD=0.1,START LABEL=,FIXTURE TOL=0.05,ERROR LABEL=
MEAS ALL FEAT=ALWAYS,MAX ITERATIONS=1,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
LEVEL=PNT1,PNT2,PNT3,PNT4,,
ROTATE=B CIR,C CIR,,
ORIGIN=B CIR,,
ALIGNMENT/END
MODE/DCC
CLEARP/ZPLUS,35,ZPLUS,35,ON
PNT5 =FEAT/POINT,CARTESIAN
THEO/<5.216,32.796,0.118>,<0,0,1>
ACTL/<5.217,32.796,-0.659>,<0,0,1>
MEAS/POINT,1,WORKPLANE
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<5.216,32.796,0.118>,<0,0,1>,<5.217,3 2.796,-0.659>,USE THEO=YES
ENDMEAS/
PNT6 =FEAT/POINT,CARTESIAN
THEO/<-27.029,20.012,0.111>,<0,0,1>
ACTL/<-27.029,20.012,-0.652>,<0,0,1>
MEAS/POINT,1,WORKPLANE
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<-27.029,20.012,0.111>,<0,0,1>,<-27.029,20.012,-0.652>,USE THEO=YES
ENDMEAS/
PNT7 =FEAT/POINT,CARTESIAN
THEO/<-5.7,-34.325,0.074>,<0,0,1>
ACTL/<-5.7,-34.328,-0.609>,<0,0,1>
MEAS/POINT,1,WORKPLANE
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<-5.7,-34.325,0.074>,<0,0,1>,<-5.7,-34.328,-0.609>,USE THEO=YES
ENDMEAS/
PNT8 =FEAT/POINT,CARTESIAN
THEO/<29.959,11.994,0.102>,<0,0,1>
ACTL/<29.96,11.995,-0.627>,<0,0,1>
MEAS/POINT,1,WORKPLANE
MOVE/CLEARPLANE
HIT/BASIC,NORMAL,<29.959,11.994,0.102>,<0,0,1>,<29.96, 11.995,-0.627>,USE THEO=YES
ENDMEAS/
A PLN =FEAT/PLANE,CARTESIAN,TRIANGLE,NO
THEO/<0.611,7.62,0.101>,<0.0000598,-0.0006592,0.9999998>
ACTL/<0.612,7.618,-0.637>,<-0.0003234,0.0007474,0.9999997>
CONSTR/PLANE,BFRE,PNT5,PNT6,PNT7,PNT8,,
OUTLIER_REMOVAL/OFF,3
FILTER/OFF,WAVELENGTH=0
MOVE/CLEARPLANE
A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/LEVEL,ZPLUS,A PLN
ALIGNMENT/TRANS,ZAXIS,A PLN
ALIGNMENT/END
Children
  • in reply to Vladimir
    Part 2 
    dim loc3= position of circle c cir units=mm ,$
graph=off text=off mult=10.00 output=both fit to datums=off dev perpen centerline=off display=diameter
ax meas nominal +tol -tol bonus dev outtol
pr 33.053 33.000 0.053
pa 262.512 262.500 0.012
df 11.548 11.500 0.100 0.100 0.048 0.000 ------#--
d1 45.032 45.000 0.025 0.000 circle b cir at rfs
d2 plane a pln at rfs
tp 0.107 rfs 0.300 0.000 0.107 0.000 ---#-----
end of dimension loc3
cir3 =feat/contact/circle/default,cartesian,in,least_sqr
theo/<26.181,-20.089,10.125>,<-0.0006008,0.0002778,0.9999998>,11.5
actl/<26.191,-20.164,10.805>,<0.0020137,-0.0017493,0.9999964>,11.542
targ/<26.175,-20.086,10.125>,<-0.0006008,0.0002778,0.9999998>
start ang=0,end ang=360
angle vec=<0.5000004,0.8660252,0.0000598>
direction=ccw
show feature parameters=yes
remeasure=no
surface=theo_thickness,0
measure mode=nominals
rmeas=none,none,none
auto wrist=no
circular moves=no
clearplane=no
graphical analysis=no
feature locator=no,no,""
show contact parameters=yes
numhits=4,depth=3,pitch=0
sample hits=3,spacer=3
avoidance move=both,distance=20
find hole=disabled,onerror=no,read pos=no
show hits=no
dim loc3= position of circle cir3 units=mm ,$
graph=off text=off mult=10.00 output=both fit to datums=off dev perpen centerline=off display=diameter
ax meas nominal +tol -tol bonus dev outtol
pr 33.042 33.000 0.042
pa 322.424 322.500 -0.076
df 11.542 11.500 0.100 0.100 0.042 0.000 ------#--
d1 45.032 45.000 0.025 0.000 circle b cir at rfs
d2 plane a pln at rfs
tp 0.121 rfs 0.300 0.000 0.121 0.000 ---#-----
end of dimension loc3
cir4 =feat/contact/circle/default,cartesian,in,least_sqr
theo/<30.488,12.629,10.125>,<-0.000541,-0.0003814,0.9999998>,11.5
actl/<30.491,12.576,10.833>,<0.0018994,0.0004675,0.9999 981>,11.549
targ/<30.483,12.625,10.125>,<-0.000541,-0.0003814,0.9999998>
start ang=0,end ang=360
angle vec=<-0.4999996,0.8660256,0.0000598>
direction=ccw
show feature parameters=yes
remeasure=no
surface=theo_thickness,0
measure mode=nominals
rmeas=none,none,none
auto wrist=no
circular moves=no
clearplane=no
graphical analysis=no
feature locator=no,no,""
show contact parameters=yes
numhits=4,depth=3,pitch=0
sample hits=3,spacer=3
avoidance move=both,distance=20
find hole=disabled,onerror=no,read pos=no
show hits=no
dim loc3= position of circle cir4 units=mm ,$
graph=off text=off mult=10.00 output=both fit to datums=off dev perpen centerline=off display=diameter
ax meas nominal +tol -tol bonus dev outtol
pr 32.984 33.000 -0.016
pa 22.440 22.500 -0.060
df 11.549 11.500 0.100 0.100 0.049 0.000 ------#--
d1 45.032 45.000 0.025 0.000 circle b cir at rfs
d2 plane a pln at rfs
tp 0.076 rfs 0.300 0.000 0.076 0.000 --#------
end of dimension loc3
cir5 =feat/contact/circle/default,cartesian,in,least_sqr
theo/<4.307,32.718,10.125>,<0.0000598,-0.0006592,0.9999998>,11.5
actl/<4.305,32.665,10.859>,<-0.0000744,0.0006359,0.9999998>,11.55
targ/<4.308,32.711,10.125>,<0.0000598,-0.0006592,0.9999998>
start ang=0,end ang=360
angle vec=<-1,0.0000005,0.0000598>
direction=ccw
show feature parameters=yes
remeasure=no
surface=theo_thickness,0
measure mode=nominals
rmeas=none,none,none
auto wrist=no
circular moves=no
clearplane=no
graphical analysis=no
feature locator=no,no,""
show contact parameters=yes
numhits=4,depth=3,pitch=0
sample hits=3,spacer=3
avoidance move=both,distance=20
find hole=disabled,onerror=no,read pos=no
show hits=no
dim loc3= position of circle cir5 units=mm ,$
graph=off text=off mult=10.00 output=both fit to datums=off dev perpen centerline=off display=diameter
ax meas nominal +tol -tol bonus dev outtol
pr 32.961 33.000 -0.039
pa 82.502 82.500 0.002
df 11.550 11.500 0.100 0.100 0.050 0.000 ------#--
d1 45.032 45.000 0.025 0.000 circle b cir at rfs
d2 plane a pln at rfs
tp 0.078 rfs 0.300 0.000 0.078 0.000 --#------
end of dimension loc3
cir6 =feat/contact/circle/default,cartesian,in,least_sqr
theo/<-26.181,20.089,10.125>,<0.0006008,-0.0002778,0.9999998>,11.5
actl/<-26.185,20.019,10.86>,<-0.0007274,-0.0007158,0.9999995>,11.546
targ/<-26.175,20.086,10.125>,<0.0006008,-0.0002778,0.9999998>
start ang=0,end ang=360
angle vec=<-0.5000004,-0.8660252,0.0000598>
direction=ccw
show feature parameters=yes
remeasure=no
surface=theo_thickness,0
measure mode=nominals
rmeas=none,none,none
auto wrist=no
circular moves=no
clearplane=no
graphical analysis=no
feature locator=no,no,""
show contact parameters=yes
numhits=4,depth=3,pitch=0
sample hits=3,spacer=3
avoidance move=both,distance=20
find hole=disabled,onerror=no,read pos=no
show hits=no
dim loc3= position of circle cir6 units=mm ,$
graph=off text=off mult=10.00 output=both fit to datums=off dev perpen centerline=off display=diameter
ax meas nominal +tol -tol bonus dev outtol
pr 32.972 33.000 -0.028
pa 142.585 142.500 0.085
df 11.546 11.500 0.100 0.100 0.046 0.000 ------#--
d1 45.032 45.000 0.025 0.000 circle b cir at rfs
d2 plane a pln at rfs
tp 0.112 rfs 0.300 0.000 0.112 0.000 ---#-----
end of dimension loc3
cir7 =feat/contact/circle/default,cartesian,in,least_sqr
theo/<-30.488,-12.629,10.125>,<0.000541,0.0003814,0.9999998>,11.5
actl/<-30.486,-12.701,10.835>,<-0.000272,-0.0015425,0.9999988>,11.559
targ/<-30.483,-12.625,10.125>,<0.000541,0.0003814,0.9999998>
start ang=0,end ang=360
angle vec=<0.4999996,-0.8660256,0.0000598>
direction=ccw
show feature parameters=yes
remeasure=no
surface=theo_thickness,0
measure mode=nominals
rmeas=none,none,none
auto wrist=no
circular moves=no
clearplane=no
graphical analysis=no
feature locator=no,no,""
show contact parameters=yes
numhits=4,depth=3,pitch=0
sample hits=3,spacer=3
avoidance move=both,distance=20
find hole=disabled,onerror=no,read pos=no
show hits=no
dim loc3= position of circle cir7 units=mm ,$
graph=off text=off mult=10.00 output=both fit to datums=off dev perpen centerline=off display=diameter
ax meas nominal +tol -tol bonus dev outtol
pr 33.024 33.000 0.024
pa 202.591 202.500 0.091
df 11.559 11.500 0.100 0.100 0.059 0.000 -------#-
d1 45.032 45.000 0.025 0.000 circle b cir at rfs
d2 plane a pln at rfs
tp 0.115 rfs 0.300 0.000 0.115 0.000 ---#-----
end of dimension loc3
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement